P
Printables
TPLINK TFC311B20 Wall Mount Adapter Wandhalter Halter TP Link Modem
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
Wyniki wyszukiwania: tplink
Liczymy pasujące modele…
P
Printables
SOPORTE INVISIBLE PARED ROUTER TPLINK AX58
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
P
Printables
DIN rail clip for TPLink MC220L
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
P
Printables
Wall mount/junction boxe cover - tplink - rapo C500 camera edit
A cover for a junction boxe to be used to lock in place a tplink rapo C500 cam (or any cam with those holes). the project is open source, the freecad file is downloadble. Cap width: 132 mm Cap height: 108 mm Box hole width: 80 mm Box hole…
P
Printables
TPLink Deco 6E Wall Mount
Easy wall mount using screws or other fasteners. I printed this flat-side down, using PLA with three perimeter walls and 10% infill. Easy print with no supports required.
P
Printables
TPLINK TFC311B20 Wall Mount Adapter Wandhalter Halter TP Link Modem
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
P
Printables
Sovol SV04 Y Rail TPLink C100 Cam mount
Cam mount for the Sovol SV04 Y Rail to mount a TPLink C100 IP camera. Mounting is done with a M4 bolt and T nut.
P
Printables
ceiling mount TAPO C520WS tplink
I created a supplementary mount for Tapo C520WS for hiding its cables away nicely for ceiling mounting. There is ample space to put all the white cable that comes out of the camera and an additional hole to let your ethernet/power cable…
P
Printables
10" Rack Mount Bracket Ethernet Switch TpLink 8 port
10" Rack Mount Bracket Ethernet Switch TpLink 8 port Flat version – Use this if you don’t have space issues between rack units (you can print this model horizontally); Standard version – Provides extra inter-unit clearance. Choose this if…
P
Printables
Underware Multiboard mount for TPLink Deco M9
Added mounting holes for Underware / Multiboard snap connectors. Underware: https://handsonkatie.com/underware-2-0-the-made-to-measure-collection/
P
Printables
TPLink Router Switch Holder (TL-SF1005D) | Wall mount | Under Desk
A compact holder for TPLink TL-SF1005D Switch that can be mounted on any wall or under desk.
P
Printables
TPLinker – Dual TP-Link Switch Organizer Case
📦 Description Keep your network setup clean, compact, and professional with TPLinker, a custom-designed case that neatly houses both the TP-Link TL-SG108 (8-port) and TL-SG105 (5-port) gigabit switches side-by-side in one sleek enclosure.…
P
Printables
TPLink TL-SF1005P 5-Port Switch Wall Mount
This set of models will allow you to mount this 5-port switch vertically (flat) against a wall using household fasteners. The first model is for hanging the switch body. This is a snug fit, but does not cover the front ports. This allows…
P
Printables
TPLink PoE Injector DIN rail mount adaptor - Adapter Hutschiene
A DIN rail mount (35mm) adaptor for the TP-Link TL-POE150S Gigabit PoE Injector . I printed in PLA without infill (perimeters and top / bottom walls set to 2mm).
P
Printables
![CoreOne Magnetic WebCam Support [ TPLINK TAPO C100 ]](https://media.printables.com/media/prints/ee9937cd-35d9-4e50-ae4c-a35043c39608/images/10175967_70e52221-5961-4624-bf67-268062f2c189_d5592770-4552-4c95-ae33-c52fd67c6e94/img_5281.jpg)
CoreOne Magnetic WebCam Support [ TPLINK TAPO C100 ]
Magnetic CoreOne WebCam Holder! Parts needed for assembly: 1x TPLINK TAPO C100 2x Magnets: 6*2*20 mm .Print in place! .PLA Tested
P
Printables
Tplink SG2110MP 14 inch SOBOX
New customer had 14 inch patchcabinet installed from Gigamedia the Sobox line ………. Since we couldn't find any parts parts like trays, the only switch we use that fit was the SG2210MP And the only some what proper solution was too make…
P
Printables
TPLink short stack 1u rack plate
Simple 1u racking plate for the omada short stack that I run. Used M6 bolts and nuts to connect the two pieces, as they are commonly used in racks already. The two TPLink devices are friction fit.
P
Printables
1U 10'' Rack Mount Tplink 8 Ports Network Switch (thin version)
1U 10'' Rack Mount Tplink 8 Ports Network Switch
P
Printables
TPLink WR802N Holder
A holder I made in freecad for my TPLink WR802N. You can download it and change the screw hole size to your liking. Note: The license on this project means that if you remix it, you MUST use the same license. DO NOT remix without…
P
Printables
Panel for Grandstream HT802 and TPLink OC200 for 10 inch rack
Remix of 3 different models: https://www.printables.com/model/1121786-grandstream-ht801-ht802-mounting-bracket https://www.printables.com/model/427461-10-inch-server-rack…
P
Printables
TPLink Omada EAP650-Outdoor access point angle wall mount
You can use it to attach access point at angle to the wall
P
Printables
TPLink rackmount sidekick
Made this to 'sidekick' for an existing model for rackmounting HP Elite desk mini's ...sorry only the right side :/
P
Printables
SOPORTE INVISIBLE PARED ROUTER TPLINK AX58
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
P
Printables
DIN rail clip for TPLink MC220L
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
P
Printables
Tplink Switch vertical rack mount
Vertical 10/19 inch rack mount for TPLink TL-SF1005 and similar switches. Fits also similar switches with dimensions: 100mm (width), 25mm (height), 98mm (depth). Two versions with cable organiser, and without. Print it as shown in the…
P
Printables
Tplink 3210 Skadis holder
To install the ligths is necesary to cut the uper shell cover, Is possible with a motor tool or with metal scisors.
P
Printables
WaveShare 7.5 + TPLink Smart Switch
This is a surface mount bracket to mount a WaveShare LCD over a TPLink smart switch
P
Printables
10" rack panel for UniFi USG 3P and TPlink MC200L
I needed a panel for my 10" rack, I decided to combine my USG and MC220L. They fit perfectly, but you can add zip tie or double tape for more security. It's a long print, almost 10 hours ! Print instructions Print in PETG or PLA.
P
Printables
tplink tl-sg105 1U rack shelf
1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height
P
Printables
TPLink N300 2020 Mount
FULLY parametric Fusion360 model to hold a TPLink N300 travel router ( this one ) to a 2020 rail. Includes mount as well as a cover. These routers are a great way to get WiFi to an otherwise Ethernet board like a Duet 2 Maestro, which was…
P
Printables
drziak na okno pre TPlink DECO M4
https://www.printables.com/cs/model/335788-tp-link-deco-m4
P
Printables
FortiAP to TPlink wall mount
I printed this with PETG. Its what I had loaded. 10% infill. works like a charm.
P
Printables
TPLink Tapo c2x0 Mount to Snapmaker 2.0 enclosure (hang-in)
See photos. Print with support. I used snug and 4 mm pattern spacing. Worked really well. 0.2 mm Layer height Two versions 0deg and 90deg. With respect the desired position of the camera you should choose the one that suits best. With the…
P
Printables
TPLink 19inch Rack Holder
Rack Holder for 19 inch Server Racks. Useable vor TPLinkSwitches.
P
Printables
Sovol SV06+ Spool Holder Mount for TPLink Tapo C100 Camera
Pretty simple mount for a TPLink Tapo C100 camera that has holes spaced for the spool holder on the Sovol SV06+, and studs for the screw holes on the camera itself. It'd probably fit on the SV06 but don't have one to test - post a make…
P
Printables
Tplink Deco Wifi Access Point holder
We had our new internet installed and needed a little shelf to place the main Access Point/Router, hence this model. Printed in white PLA at 10% infill,
P
Printables
Tplink EAP245 ceiling mount
model je jako držak na strop pro přístupovy bod (WiFi Access Point) montaž samotného držaku pomocí samořeznych šroubu pozor držák jde namontovat pouze jednou stranou!!!
P
Printables
TPLINK CPE210 Wall Mount Holder
A holder for a TPLINK CPE210 device. The CPE210 is designed to attach to a pole. This holder can be screwed to a surface and then the device just sits inside it with the ethernet cable sticking out of the bottom. Note that the CPE210 is…
P
Printables
TPLink Tapo C100 and Kasa KC100 camera mount for Bambu Labs P1S or X1C
The camera for the P1P and P1S is mostly useless and is more of a time lapse still camera than a video camera, this allows you to use a tapo C100 for a real time camera and still keep the built in camera. It mounts on the glass for the…
P
Printables
Ender 3v2 Y-rail TPLink C100 Cam Mount
I switched from my Wyze V2 Camera to a TPLink C100 as it has better support for RTSP and doesn't need to use a USB port so I needed a mount to hold the camera. The socket from @MrNeedlemouse was superior to other sockets I tried so I…
P
Printables
TPLink Tapo C110 Camera Mount -- Bambu Lab X1C/P1S
A simple mount for the Tapo C110/C100 camera that uses the screw connection of the hinge. There are 8x3mm magnets embedded to support it, these can be used optionally if there are slight noises. Printed with normal support for the magnet…
P
Printables
TPlink Tapo Camera holder with cable slot for Sumo enclosure Prusa XL
The OpenSCAD file (TPlinkCameraMount.scad) reads the existing 3DSourcerer STL file (TOP CORNER FOR TP LINK.stl) and drills the hole and forms the slots. The result is the STL file (TPlinkCameraMount.stl). A snapshot of the slot is shown…
P
Printables
TPLink S4 Cradle
This model was made to elevate the S4 mesh routers from TPLink by half a centimeter from the desk/cabinet, to be able to run cables under them, as well as to keep the ones in the kitchen elevated in case of running water etc. Can be…
P
Printables
TPLink SG105 vertical stand
Vertical stand for the TP Link SG105 switch. If your printer is perfectly accurate this should be a decently tight fit. Very stable with a small footprint. Also included a cut out notch as it appears the SG105 has air vents on the sides…
P
Printables
TPlink AP Mount - Threaded Rod
This model allows you to mount a TPlink AP to a ¼" threaded rod should you need to drop it down a bit. It attaches to TPlink's existing mount using #8 machine screws. Mount was designed for TPlink APs but their mount is designed to work…
P
Printables
Wall mount/junction boxe cover - tplink - rapo C500 camera edit
A cover for a junction boxe to be used to lock in place a tplink rapo C500 cam (or any cam with those holes). the project is open source, the freecad file is downloadble. Cap width: 132 mm Cap height: 108 mm Box hole width: 80 mm Box hole…
P
Printables
Holder for TPLink UP525 25W 5-Port USB Charger
Holder for TPLink UP525 25W 5-Port USB Charger
