1 / 8
Ubiquiti UniFi U6 Enterprise In-Wall Adapter — zdjęcie 1
1 / 8

Ubiquiti UniFi U6 Enterprise In-Wall Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A parametric model of a wall mountable adapter for the Ubiquiti UniFi U6 Enterprise In-Wall accesspoint.

Ocena
0 / 5
Polubienia
1
Pobrania
33
Wydruki
0
Wyświetlenia
403
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This is a parametric model of a wall mountable adapter for the Ubiquiti UniFi U6 Enterprise In-Wall accesspoint. The desired wall width can be configured with the “MountingWallWidth” parameter in the Autodesk Fusion project file or alternatively altered manually with cuts and additional extrusions in the STEP file.

To assemble the parts (mounting plate of the accesspoint to the middle part and the middle part to the wall part) the following parts are needed:

 - 8x M4 Threaded Heat Inserts (Top width has to be 6mm / length does not matter)
 - 8x M4 Countersunk Screws (recommended minimum length is 8mm / absolute minimum length is 6mm)
 - 1x 90° Angled down Ethernet Cable

The cable outlet is on the left side by default (just mirror the middle part if you want to have it on the right side).

Tagi