Tundra Tailgate Handle Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tundra tailgate handle rear camera mount
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a GFC camper on the back of my Tundra without windows. So I installed a rearview camera/screen setup. To mount the rear camera, I created this file to mount the camera in the tailgate handle so it's protected from direct sunlight and looks straight back.
this mount was designed for a generic camera like this one: https://a.co/d/4Gvt2fJ
the camera mounting bracket is removed, then the tiny screws re-used to attached the camera to the 3d printed mount.
To install this, you do have to drill a hold through the back plastic tail gate handle, then Dremel more out to be a square to fit the camera through. Then I used a single button head hex screw to clamp the housing/shroud together around the camera. Some sanding and heat may be needed to better shape the front shroud print to fit the curve better.