Tundra Tailgate Handle Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tundra tailgate handle rear camera mount
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 24
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I have a GFC camper on the back of my Tundra without windows. So I installed a rearview camera/screen setup. To mount the rear camera, I created this file to mount the camera in the tailgate handle so it's protected from direct sunlight and looks straight back.
this mount was designed for a generic camera like this one: https://a.co/d/4Gvt2fJ
the camera mounting bracket is removed, then the tiny screws re-used to attached the camera to the 3d printed mount.
To install this, you do have to drill a hold through the back plastic tail gate handle, then Dremel more out to be a square to fit the camera through. Then I used a single button head hex screw to clamp the housing/shroud together around the camera. Some sanding and heat may be needed to better shape the front shroud print to fit the curve better.