1 / 2
Bondtech LGX Lite Pro K1\K1 Max XY Carriage Belt Retainer (Not Original)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom model I made for the belt retainers for the BondTech K1\K1 MAX XY Carriage.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I built this custom model for the left and right belt retainers for the Bondtech LGX Lite Pro XY Carriage.
These models are not based on the original ones in any way (long story :-D)
I have tested dozens of variations and found this one works very well. It is not perfect, but it gets the job done if you need it in a jiffy.
Some things to note:
- Since this a custom model for a somewhat sensitive part of the printer, I CANNOT BE RESPONSIBLE FOR ANY DAMAGE that is caused.
- DO NOT PRINT WITH PETG OR LOWER (don't ask how I know that). Should be printed in ABS, ASA, Nylon or something else with a very high temp resistance.
- This may not be perfect but it will work good enough. I have personally done heavy printing with this and so far they have held up, but I cant say long-term so do bare that in mind.
- I am providing this model because at one point I needed a working replacement until my official replacements from Bondtech came in and I figured someone else could benefit from these models as a quick fix until they get the official retainers.
- There are three models, one top section and one for the left and one for the right side.
- Print two tops and one of each for the left and right sides and glue the tops to the bases
- In case you are wondering why there are in separate pieces (top and bottom), its to avoid having to use supports when printing them.
Other than that, enjoy and please leave comments on your experience! :-)