Bookmark - Pokémon Evolution Set: Black Background HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Evolution stages set of Pikachu, Charmander, Squirtle, and Bulbasaur. Uploaded images are of actual prints.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Pikachu
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Sunflower Yellow (any yellow)Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer (0.72mm) swap to Orange
At layer (0.96mm) swap to Sunflower Yellow(Any Yellow) for the rest.
Charmander
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer (0.8mm) swap to Red
At layer (1.04mm) swap to Orange for the rest.
Bulbasaur
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 4
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer (0.8mm) swap to Green for the rest.
Squirtle
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Elegoo Sky Blue (Cyan or any light blue)Transmission Distance: 3.8
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Sky Blue(Cyan or any light blue)for the rest.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
