Bookmark - Pokémon Evolution Set: Black Background HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Evolution stages set of Pikachu, Charmander, Squirtle, and Bulbasaur. Uploaded images are of actual prints.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 35
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Pikachu
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Sunflower Yellow (any yellow)Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer (0.72mm) swap to Orange
At layer (0.96mm) swap to Sunflower Yellow(Any Yellow) for the rest.
Charmander
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer (0.8mm) swap to Red
At layer (1.04mm) swap to Orange for the rest.
Bulbasaur
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 4
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer (0.8mm) swap to Green for the rest.
Squirtle
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Elegoo Sky Blue (Cyan or any light blue)Transmission Distance: 3.8
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Sky Blue(Cyan or any light blue)for the rest.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
