1 / 5
Double Handle fade comb, 10mm to 23mm (left AND right handed) — zdjęcie 1
1 / 5

Double Handle fade comb, 10mm to 23mm (left AND right handed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fade comb from 10mm to 23mm with ambidextrous handle. Especially useful for those that wish to cut their own hair.

Ocena
5 / 5
Polubienia
21
Pobrania
217
Wydruki
0
Wyświetlenia
1041
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

This comb can be used with left or right hand. I've shortened the handles somewhat as well, making them sturdier.
This was quickly done in slicer but I found the fix to be very useful, so I thought I'd put it here.
Due to reduced handle length, prints faster, uses less filament, while adding functionality.

The original states 10-25mm, but my calipers say 10mm - 23mm.

- USE A BRIM for bed adhesion. Trust me. Also, it's very easy to remove.
- 0.15 layer height, highly recommend. Very smooth.
- For perimeters, just make sure the comb's teeth are solid.
- Personally, I used PLA. 
Maybe try PETG to avoid breaking any teeth or something. Not necessary, though. PLA worked well with no problems.

Don't be afraid to sand it down and/or use a deburring tool to make the slope smoother.

Tagi