Adjustable Wall mount for Cosplay Helmets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be universal, for mounting 3D printed or other lightweight cosplay helmets to display, with adjustable angle
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I noticed there was a lack of holders for Cosplay helmets, that had an adjustable angle. So I made this simple holder thats intended to be universal, and has a pad so it doesn't wreck the inside of your helmet. It's not intended to hold a heavy motorcycle helmet, but it is sturdy for lighter things. Just tighten the knobs gently to display your helmet as you like. The helmet is held by the curved arm and pad.
I recommend printing all pieces at 120% for more strength and better clearance. You'll need support for the hinge parts, but thats all, the rest prints unsupported. You'll need to print two pins, and one of everything else. 0.24 layers work fine. You could go thicker if you like, the threads are the only area that may need the finer layers. I also recommend 8 perimeters for the Pins so they don't break, be gentle.
I do NOT Guarantee that it will not break, It's up to you to print it tough and use it properly, and mount it properly.