Liczymy pasujące modele…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Adjustable Shower Head Holder. If the holder slides too easily in the collet and it cannot be clamped, treat the hinge surfaces with cyanoacrylate glue and let them dry.
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
!!! Print it on its back !!! Print time for SLIM V1 version is about 3h 20m Print time for WIDE V2 version is about 7h Print time for AX (Snap) Wide V3 is about 5:30 Base, 1:10 Ladder, 0:20 Leg I have tested only 0.4 nozzle so go above or…
too lazy to order the original part but not too lazy to make my own
Simple seatbelt clip for changing the shoulder strap position. Minimal material with reinforcement where needed for rigidity. I would suggest printing in a heat resistent filament as it will be in a vehicle.
Adjustable ventilation cap. I use it with a laser engraver to regulate suction. Diameter 60mm An M5 socket head bolt and nut are required for assembly
Stand is made from more parts. Use “AsemblyScheme.pdf” (and instant glue). You will nedd more parts : Screws : M3x12; M8x16; M4x10 Pads : Felt pads 38mm, Silicone pads 10mm see the “AsemblyScheme.pdf” Good Luck … :)
Gap 1mm-5mm Precise spacers for adjusting fronts ensuring a perfect fit. Even gaps, perfect alignment of fronts in furniture. Ideal for both DIY and professional furniture makers.
This is a arm for a Magsafe charger or a stand which can be moved and held in a wide variety of positions. It can be mounted right side up or upside down. The clamp is 50mm so should be able to mount to most furniture -When changing the…
Estas son partes complementarias al trabajo realizado por theamzngq en su “ Adjustable iPad Air 2 mount ”. Una base con un poco mas de peso y sin modificar las dimensiones que se realiza insertando en medio de la impresión 20 tuercas M8.…
Needed 7 filament guides instead of the regular 6. Rather than making a fixed set, I opted for a dovetail rail with separate guides, so I could print as many as I need while still being able to adjust back to 6 or other number later…
The magnet is slightly off-center. that for me kept the blanks in nicer. It's designed for lapping films. If used with leather strops, it will change the sharpening angle due to the leather's thickness.
Updated Version 2 available easy to use. This tool allows users to create music staffs of adjustable sizes, ideal for personalized music notation. Whether you're a musician sketching ideas, a composer drafting a new piece, or a teacher…
I found myself playing my steamdeck mostly on tabletops and when using this stand the angle was uncomfortable for my hands, so I decided to remake it with sharper and adjustable angles. This stand can be positioned in 5 angles and fits in…
The footprint of my 50" Hisense TV is 34 inches and I needed it to fit on a narrower cabinet. This adapter moves the legs in approximately 3 inches on each side. I use M5 brass inserts for the original leg to attach to the adapter as it…
Just an easy to print model with snap fits for the usb and psu module.
The inner diameter is 8mm and has a depth of 6mm.
In case you have trouble adjusting the leg - you can use this handle
MMU3 tool for easy tension adjustment MMU3 This tool can be used to quickly restore the correct tension. Screw in the screw so that the top is exactly flush with the surface. It is possible that my setting differs from your setting due to…
I am working on adding a larger heel part soon. The arms must be inserted into the inner sides of the toe arms on the WinWing Orion 2. They jus snap in. The heel part slides in after that and can be fastened inthe preferred position.…
I use an amazon basics condenser mic on my desk (yeti clone), and I mount it on an arm so I had the original support mounting holes free to hook a filter onto it. The thing definitely works and I'm happy with it, the grill is just 2…
Hello! This is a basic adjustable phone stand with space for a small tablet. The design is such that there are three levels of adjustment and cable lead; both give versatility and convenience to the design. In addition to these features,…
This part replaces the original one. Two parts click into each others. Fell free to improve my design. Printer: Bambu Lab A1 Infill: 15% Filament: Aurapol PLA White
A simple, easy to print keychain adjustable wrench. Made of only three parts, with generous tolerancing yet still retaining great functionality, it is easy to customize with colors or scaling it up or down (Smallest I have managed to…
Keep your gym tidy and your plates organised. This custom-designed holder is made to perfectly fit the weight plates from adjustable competition-style kettlebells, so you’ll never have to dig through a pile of plates again. 🔩 Compatible…
This is a desk stand for a small desk mixer, It's designed to fit the foot stubs and screw holes of the Beringer Xenyx 302USB with an adjustable tilt This uses 0.75mm gauge paper clip for pins.
Length ajustable right angle tool - slide the ruler in and out + straight line tool - place pencil in the hole and go!
Easy ruler for reading how much weight is on the Eisenlink Adjustable Dumbbell (https://www.amazon.co.uk/dp/B0BZHHCSFD) The left side of the ruler measures when only the 2kg plates, are used. Read the right hand side when 2 x 1kg plates…
This custom-designed Wyze Cam 4 mount provides a stable and adjustable solution for optimal camera positioning. The mount can be used for wall or ceiling installation , ensuring a wide range of motion for better surveillance coverage.
It fits into a regular 36 mm (OD) waste pipe with an inner diameter of 31.6 mm. Intended for air ventilation purposes, not liquids. I made it a bit loose to ensure it went in without compressing the printed thread. Needed a couple of…
E N G L I S H My Artillery X3 Plus had a crooked print head, which caused the prints to tear off at high speeds. You can't use a standard measuring angle, so I designed a small angle. While I was at it, I thought it would be a nice idea…
This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…
This should be functionally the same as TL-PD400 tool. Outer sleeve tightens the 10 mm nut and inner tightens the 7 mm one. I have the PD-GR400. Haven't tested with others, but I'm guessing they use the same nuts. You put the smaller tool…
Ruins with high walls for the board game “Clash for Eternia” or easily magnetized walls: I have used the slicer to cut the walls above the first row of stones and added circle shaped connectors. With adjusting the dowels it can easily be…
This project combines a third hand, bar clamp, and work holding tool into a cheap and versatile desktop aid for any maker. The tougher the filament, the more robust the clamps. I have done my best to model parts with layer lines in mind…
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
Uses pan head screws for both adjustment holes and end attachment. The screws should thread into the part, so print with several walls. I printed in abs, but other materials should work as well. The parts adjust from approximately 210mm…
I thought that the focus knob was to small so I threw this together to fix that. Will fit any microscope that's around 33mm. Total diameter is around 70mm. Has holes for two 4mm bolts to hold it on. printed in regular pla with 5 walls.
Adjustable anti-backlash adapters for the X and Y axis on the 3018 CNC. Y axis fits stock set up. X axis fits with upgraded Z axis and MGN12H adapters. See my other files for those.
Adjustable 3D-Printed Glasses Retainer Choose either the large or small attachment model. The small one is designed for very small glasses, while the large is better suited for most glasses. Never lose your glasses again — this…
Hawse Fairlead with adjustable fixing slot 254mm/10" Passacavo per verricello Overall dimensions: 300x67.5x18mm Centre to centre 254mm / 10" Standard Bolt Mount Pattern with adjustable fixing slot Mounting hardware needed M10 / 3/8" bolt…
English Adjustable 3D-Printed Stand for iPad Pro M4 & M5 11” (2024 & 25) – Dual-Color Modern Design with Integrated Apple Pencil Charging Key Benefits: • Multi-purpose versatility: Three optimized angles (85°, 50°, 25°) perfectly suited…
I have a Meade ETX-70 telescope and wanted to try some astrophotography. I found a design someone else had made, but unfortunately, it didn’t fit my telescope at all, and there was no CAD file included. So, I decided to redesign it from…
I printed out the Rift laptop stand and liked it but wished it was heavier. So I modeled up an adjustable laptop stand that can be filled with whatever you want, I chose lead shot because it was much heavier than sand or concrete and…
Mechanical Adjustable Phone Stand This multi-part phone mount combines functionality with smart engineering. Featuring a built-in worm gear controlled by an adjustment knob, it lets you fine-tune the viewing angle with precision. The…
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
This is a model that combines the govee rgbic tv lights with The multifunctional Adjustable desk mount for betting mounting options. This was designed to to use with a corsair xeneon flex monitor.
Adjustable phone stand that uses a thumb screw for precise adjustments of the phone angle for perfect screen viewing. step file is also provided for customizing the phone back plate. Printing: Material: PLA works fine. Layer height:…
I am not a great pinball player but I love it. For my games I have at home I like to set them up to be easier for myself but also for friends that come over and are totally new to pinball. Some games are pretty hard for novices and it's…
Using little stones, marbles or similar, you can adjust the weight and sinking speed of this diving ring. There are three options available: Magnetic: Everything is held in place using 6x2 mm magnets. Depending on the magnets strength,…
Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more. The “foot” of the stand attaches to the “base” of the stand using: Four M5x20, M5x25, or M5x30 countersunk screws M5 heat set…
This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.
Remix of PhilippSorenses's remix of PsychProd's original. I had the small issue, that my silica gel beads / pearls were uneven in size and sometimes broken. That led to a lot of them falling through the main container's wall. I slightly…
Adjusted to fit opening tower arm + longer connector for more stability
Added side supports to use the Cloweit LBE-04 inductive proximity sensor
Depending on the state of the air adjuster base, you may need to scale the model up or down 1-3% in the X-Y Axis. I adjusted for 1% smaller and the fit was perfect.
For best results, print solid. PLA 0.2mm layer height Disclaimer: I make no promises or claims about the safe weight-carrying capacity of this model. You make use of this at your own risk with no liability or responsibility from me.
This is a custom 3/8 drive deep socket intended to fit the head of the lower, outer, headlight stud on a Jeep Grand Cherokee ZJ that is twist locked into the header panel. the hex on the end is a 19mm and the body is a 26mm hex. I printed…
This is a laptop stand that has pins that can adjust to any size needed using the bar extension to add 2 bars together if required strong enough to hold any laptop you may need can be entirely printed on one 220*220 build plate. How to…
*Heat-set inserts required* Thank you for checking out my model. The problem this model aims to solve is that I would have to take off my webcam every time I wanted to rotate my monitor. It also provides a stable mount for the webcam…
Self-adjusting headphone stand that slides onto your desk. Should fit most standard desk sizes, but measure before if you're unsure. The rubber pads are 2x6mm. Let me know if your desk requires a different size! Printing Walls: 4 Infill:…
Remix of @DaveDUtah_155970's adjustable blind spot mirror mount for my 2024 Hyundai Kona EV. You'll need to remove the corner panels from the doors and clip one socket side of the print around each. This will be held in place by tension…
Splice tray with adjustable loop length. For optical fiber joints.
3D printed adjustable Phone Stand assembly video : https://youtube.com/shorts/c39V2KsjZcw?feature=share Stand only, tesla charging station is available for free in my other items
Same as this paid tool: https://www.ebike24.com/enviolo-shift-cable-gauge Painted 3MF file included for Bambu Studio Used on a Tern GSD
✅ Compact & sturdy design ✅ Easy to print – no supports needed ✅ Simple height adjustment ✅ 4 / 5 mm screw holes for mounting
You need: Recommend to print in ASA 2x M3 hex nuts 2x M3x16 pan head (or similar) screws 2x M3x10 countersunk screws
this is a taller version of the NorcoT lid riser that I designed for additional cooling, it has the mounting corners By Michel Jubault included in the design, and the slat inserts have be resized for easier assembly.
Originally printed the Drybox from Prusa Guy but the first Prusament spool I inserted was due to some production fail 2 mm wider and could not fit in. So tried the mod from DG-RoboTek that gave me the extra milimeters but already during…
Würth Adjustable Filament Spool Roller Introducing the Würth Adjustable Filament Spool Roller – When normal Spools are just not enough! Are you looking for a solution that can hold all your Spools? Whether its tiny sample spools or huge…
Printed with PLA BOM McMaster 8969T925 316 Stainless Steel Corrosion-Resistant Compression Springs. CAD file just for model, actual spring is 9.5 X 16 X .7 mm 6655K13 Thrust Ball Bearing 9414T6 Set Screw Shaft Collar 91847A429 18-8…
Elegant modular organizer for sachets and condiments, featuring a premium ribbed texture, smooth dividers, and a minimalist design that fits any kitchen or workspace. Printing Instructions No supports required. Set the Wall Generator to…
RECENT UPDATE: Modified tensioner screw cap and added shortened Lemonstruder pieces for durability and more range of adjustment I had a lot of trouble getting a K1C gear that could grip filament well enough for my rev E lemontron. I…
Only for light displays (max. 27"/ 3KG) Required Parts: 2x 15cm, 10mm Aluminum/Steel Rods 1x M6x80 screw 1x M6 nut some washers Display side: 4x m4x16 Vesa plate side: 4x m4x12 screws 4x m4 nuts Recommended Print Settings: Material: PETG…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
This model came into existance after I've installed a 5015 satsana fanduct with a CR Touch mount which made my toolhead miss the stock position of the endstop. It simply didn't reach it. This is an elegant solution which moves the…
The OmniFlex Lamp is a fully 3D-printed, extremely flexible desk lamp based on a segment system similar to industrial loc-line hoses. Its greatest advantage is that it can be positioned in virtually any position and at any angle, and the…
Part for cell phone holder for the car! Made for bigger cell phones!
This headphone wall hanger is designed as a simple, sturdy, and customizable mounting solution for everyday use. Its minimal profile keeps headphones safely stored while saving desk space and maintaining a clean setup. The model includes…
OEM versions are 4, 8 and 12 degrees. Here are additional 3, 5, 6, 7, 9, 10, 11, 13, 14 and 15 degree handles. No need for supports, print palm side down. Tight groups!
This is an improved bearing hold-down plate for the Anycubic ACE Pro, designed to be stronger and to add adjustable tension to the filament drive assembly. Properly holding down the drive wheel shaft and bearing is critical for reliable…
Both the repistory of adjustable pusher and the corresponding manual for the Bolt OS select fire system
Context I created this because my chair kept accidentally hitting the buttons on my IKEA MITTZON controller/control panel. This 3D print lets you re-mount the control panel 15mm farther from the edge of your desk to solve the issue.…
I designed this holder to mount the AquaEl Leddy Slim LED light underneath Ikea's Lack series products (tables/shelves). The design features a sliding mechanism, allowing you to adjust the LED light's position back and forth to your…
This is a spare part replacement for the direction adjusting lever of my Bosch GSR 18-2. Original Part-No. 2 609 101 009. The part is mounted in many other Bosch tools. Printed with Prusament PETG. Due to the sloping surfaces, I printed…
Overview: This Z-axis table is engineered to mount directly onto the Creality Falcon2 laser engraver frame, providing approximately 6 inches (150 mm) of vertical adjustment. This lift creates sufficient clearance to accommodate the design…
An affordable solution to setup the sharpening angle for knifes. printed in PLA black and white, layers 0.2 mm. 2 colors option for 2 items. Only one support required for the "base", other pieces without support. You need 2 M5 30 mm bolts…
A stand to mount a regular 120 mm fan to, with adjustable tilt. Please note: The two "guarded" variants are meant to be sliced with a 120mm cylinder modifier that disables the top and bottom filled layers, thus leaving the infill pattern…
Parts Needed M8 Nut M8 Bolt Self tapping wood screws x 2 Print Instructions Pause at layer 192 to insert M8 Nuts
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
I designed this a couple of years ago for my Creality printers and I had printed out many variations using this design in Triple-Quad and Quad-Quad planetaries. After building my AWD Voron Trident this basic pair of FreeCAD files were too…
Working on a big plane while it's resting on a table, being careful you don't slide it and damage them? Want a beautiful display to show off your hard work? Then worry no more, your solution is here! Make it taller, shorter, wider or…
This model is an MX‑G System Sprinkler Extension designed for easy integration into modular setups. It includes an M5 internal thread compatible with Festo QSM‑M5 pneumatic couplings or any similar push‑in connector. The design provides…
