Magnetic Indicator Mount for Micro Adjustments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and easy tool to hold an indicator on a magnetic table
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is based on Matthias Wandel's indicator mount for his table saw fence for micro adjustments to rip sizes.
I printed this at 0.2mm layer heights with a “color change” at layer 11/2.2mm to put some magnets in. My magnets are about 11mm in diameter and about 1.5mm tall. The f3d file has parameters if you want to adjust these for your own magnets.
The indicator size probably fits most cheap indicators, but YMMV. The fit can be a bit hard to nail down as just a little bit of over or under extrusion can yield unsatisfactory results. It must fit snug to get a useful reading.