Liczymy pasujące modele…
Unlike other designs it does not integrate dovetail mounting and therefore is completely generic, working in any form of tool post from quick change to standard. May limit the size of stock that can be trammed in on mini lathes due to…
Improved version of the initial Nozzle holder / size indicator (https://www.printables.com/model/865318-nozzle-holder-size-indicator) The nozzle holders kept sliding off when handling the package. Now they are fixed without tools to…
Teaclock Dial indicator box. Shadow box with mix material print with TPU inserts to protect the instrument.
For HONDA CBF600S, maybe for other HONDA motorbikes USB charger holder: https://www.aliexpress.com/item/1005005677210208.html?spm=a2g0o.order_list.order_list Holder for gear indicator:…
Tube for water level indicator. Fits with indicated original model, but also works with other parts. 60m high 12mm outer diameter, so depending on the wall thickness (vase mode) you get a certain inner diameter. For e.g. 0.6mm wall, you…
About This is a bin reminder. Modelled as a 1:10 scale model of the 360 litre UK wheelie bin. It has an insert you can wrap RGB LEDs around (however you like) and light it up. Necessary hardware 15x M2 threaded insert (…
This is a Grade 1 Indicator used in conjunction with the Braille Tiles to signify the transition from numbers to letters. Dot 5 and Dot 6 appear after a number in the sequence.
Big (125 millimeters diameter) dishwasher status sign wheel: empty dirty clean Do not open 5 pieces of magnets are needed (8mm diameter, 2.5-3 mm thick)
Tired of having a single cap for each battery state? Here's a 3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it should fit a normal XT60 connector.
Gridfinity tray for Mitutoyo 2046A dial indicator, likely fits others with lug back, plastic cap on top, and dovetail features on the top corners. The indicator sits high enough you can grab onto the bezel, so I didn't include finger…
This is a wind-indicator that I made for my daughters dinghy. It uses 4mm diameter rods (I used carbon) with the pieces super-glued in place. The pivot is two separate pieces that are printed together can not be separated. I needed to…
This indicator holder allows you measure run-out on a lathe fitted with a Gedeihen Aa Max quick change tool post. If you print a mirrored version you can measure both radial and axial run-out. The height adjustment takes an M5 bolt/screw.…
Printed on Ender 2 pro. No support, no brim. Swith filament to gain multi colour highlighting the icon. One is left blank to be modified at will.
Standard 1x3 gridfinity bin, with cutout to accept a 52mm case/58mm bezel dial indicator with flat caseback. All the models I found were storing the dial indicator face up. This is wasting an enormous amount of space for anyone owning…
I e included everything that you need to use either text mods or SVG mods to the plates as well as a few finished products.
Never guess again! This simple dishwasher dial lets you flip between CLEAN and DIRTY in bold text, which can be printed in two different colors by changing filament mid-print. Fast to print, easy to read, and attaches with tape or a…
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
If you're restoring or repairing a Minolta XD7/XD11, you might need to remove the film indicator window in order to better replace the original grips/leatherette. This involves cutting the plastic nubs that go through the door, as the…
a small indicator light to show which implement is being selected. For the colloring I used 2 layers of standard white. I've a standard printer with just one color, you could pause the g-code manualy and swap out the color. With 2 layers…
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
A filament indicator for Prusament NFC spools . Update 2026-01-27: Removed 'feet' versions, added TPU. Update 2026-01-14: Uploaded V2. On V1 the second and third number of grams were swapped. It fits on 2 places on each sides of the…
One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very difficult. This aims to resolve this issue by providing a sloped cursor that makes contact with…
Kobra S1 - Fan cover Dial indicator support Dial gauge case diameter = D 53 mm Dial gauge rod: D 8 mm For assembly Dial indicator to the suport you will need a M6 screw and Nut. Check in the picture the result before and after hotbed…
Dial gauge - fan cover print head support. Dial gauge case diameter = D 38 mm Dial gauge rod: D 8 mm Check in the picture the result before and after hotbed adjustment. ATTENTION!!!! When using the Dial Gauge, keep the door open to avoid…
This replacement indicator for the ZN50QT-A type scooter from Minreva (normally also fits Lexmoto Tommy 50 and Znen/Zhongneng models) was impossible to find/source anywhere while I was repairing one. After 20+ hours of measuring,…
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
Printed with Prusament PETG Black + Anycubic Transparten PETG. Body and roof 0.3mm supports required for the body. Hinges are all 0.1mm slow down speed to 25% might take a few tries. Items used: 1x 2mm steel axle, found on aliexpress for…
Remix for standard deck (42mm) and no mercy deck (64mm) Prints without support
I used it to check the flatness for calibration purposes of a new DLP resin print bed (as shown in the image) This precision dial indicator mount is designed for accurate bed leveling and flatness measurement on FDM 3D printers. It…
just a small plate to put on top of your z-axis, so you can add whatever you like as a indicator. the magnet wont be super strong so you need balance the thing you glue on top. Also it probably tips over when its too top heavy. I printed…
Bought a gauge for tramming my printbed on the P2S. Unfortunatly my gauge came with a holder on the backside so i won't fit into the printed toolhead holder for the P2S. This is a replacement cover. I printed it in black PLA.
Gridfinity holder for 2 Fowler dial indicators with mounting lug. Slightly oversized so it should accommodate other brands as well.
I designed this enclosure for a project that uses the Seeed SenseCAP Indicator D1L (the "Meshtastic" version with external antenna), specifically to hide some external electronics connected to the Grove connectors at the back. This model…
A customizable maintenance tracker, where you can set a month and year (e.g. for next or last service interval). Originally created to keep track of my last water filter backwashing (Filterspülung), but I think this can be useful for…
This bracket is designed to attach a dial indicator with 8mm stem to the toohead, allowing for manual leveling of the bed. It requires a couple of M3 screws for assembly. The clamp is held to the base by two M3×8×⌀5 threaded inserts, the…
A very easy-to-build Airspeed Indicator for flight simulation. Material needed: 2 pc 28BYJ-48 stepper motor with ULN2003 driver board 1 pc EC11 Encoder (15mm Plum) 1 pc Ø 79mm x 0.2mm transparent foil. 3 pc Screws M4x25 4 pc Screws M4x10…
Suitable for an SV 650 (2016-20xx) turn indicator base, i used a CHAFT Aftermarket indicator with an M8 thread the idea is to take in sandwich the steel plate holding the serial turn indicator with the two printed parts increase the space…
Gridfinity bin for LIMIT 11911-0104 indicator. With stacking lip and magnet sockets. STEP file included. Printed from eSun's PLA+ Bone White. Made using Lev Mishin's GridfinityGenerator plugin .
This was a model I created after trying to adjust the bed leveling screws. After running the bed mesh it was still way off. Mounting the Harbor Freight #63521 Dial Indicator in this holder and onto the rails, I positioned the indicator…
A slip on cap for your wheel nuts to give a visual indication if they have loosened. Included 3mf and stl are for standard 19mm wheelnuts. The OpenSCAD default parameters are for standard 19mm trailer nuts. Slip them over your wheel nuts,…
UPDATE: This is a new version of the model, with a slimmer base for even better visibility. One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very…
Allows you to connect an LED indicator light to an older head. MK4-S PLA Nozzle – HF 0.4 Layer - 0.3 Fill 20%
This is a Gridfinity bin for a TESA DIGICO 10. Also there is a space for CR2032 Batteries. The Bin is 4x2. There is a space for 6x2 Magnets in the corners. Base generated using Gridfinity bin generator. Custom tool cutout designed from…
This is a Gridfinity holder for dial test indicators (lever indicators) . The holder is designed to fit standard dial test indicators with a similar body diameter and lever layout. Compatible with models such as TESA and Compac shown in…
The holder is designed to fit standard dial test indicators with a similar body diameter and lever layout. Compatible with TESA TESATAST indicators and similar models shown in the photos. Both bins fit standard Gridfinity baseplates and…
The filament boxes of the Chitu FilaPartner E1 are shipped with a rather useless paper humidity indicator. Most people add a digital hygrometer and remove the indicator. This model lets you replace it with a nice custom label. I printed…
This is a Gridfinity bin for a Mitutoyo ABSOLUTE ID-C125RXB. The Bin is 5x2. There is a space for 6x2 Magnets in the corners. Base generated using Gridfinity bin generator. Custom tool cutout designed from scratch.
Glue this to a JR bay cover and then you have a place to hold a windicator stick to help you find thermals when flying radio controlled model gliders.
This is a Gridfinity bin for a Mitutoyo ABSOLUTE ID-N1012. The Bin is 4x2. There is a space for 6x2 Magnets in the corners. Base generated using Gridfinity bin generator. Custom tool cutout designed from scratch.
This is a Gridfinity bin for a Sylvac 25mm. The Bin is 4x2. There is a space for 6x2 Magnets in the corners. Base generated using Gridfinity bin generator. Custom tool cutout designed from scratch.
I liked the concept of the Core One/+ Magnetic Top Cover, but I felt the tab handles were too big. There were other handles available, but I wanted the handles to be on the side, not protude past the frame of the Core One, and complement…
Big thanks to both Till-83 and Hatrick3D for creating and sharing their projects. After discovering them, I was immediately sold on the concept. Like them, I was looking for a simple way to visualize the current electricity price level…
When using the original, if I picked a tool and ran it along the x axis at Y=360, one of my docked tools' labels would hit the back end of the in-use tool. This would very likely never happen in real-world use. But out of an abundance of…
I wanted to use a dial indicator to level the bed manually, and I couldn't find one for this model. I hope it helps Cheers! Category: Hand Tools
This is a redesign of the MSB Nozzle Size Indicator dial ( https://www.printables.com/model/314912-nozzle-size-indicator-for-mk3s) . The plate has been redesigned to fit both the MK4S and the MK3S by being placed horizontally on the top…
I made a simple chess "turn indicator" to indicate if it is Whites turn or Blacks turn during a long form chess game where players may leave the board. It consists of two halves which snap together like Lego. The little flag is used to…
This is a gridfinity organizer for a Starrett Dial Indicator.
Modular Filament Stock Indicator for IKEA SKÅDIS or Free Mount This modular system allows you to visually track the quantity of filament spools you have in stock. The base plate is designed to mount directly onto an IKEA SKÅDIS pegboard ,…
I created my own sliding indicator, which holds better in position and allows you to assemble your own tags. Printed with nozzle 0.4mm, basic support for the caps and under the "spring" of selector (then scrape off), PETG (it is harder…
This is a 3D-printed base for a depth gauge dial indicator , designed to help with precise measurements when setting up a planing form for bamboo rod building . The base is designed to fit a standard 8 mm stem dial indicator , which is…
Cover for the Afriso 16500 water level indicator - mounting extension. Osłona na wskaźnik poziomu wody Afriso 16500 - przedłużenie montażu
This is a turn signal auto cancel for a TA22. This 100% works on a 1974 Toyota Celica, and should be suitable for most 70s era Toyota's that use the 84310-60062 or Toyota 20-34 indicator stalk or equivalent. This includes: KE20 KE30 KE30…
This slips over an 8mm dial indicator shaft so that it will fit in a 3/8" adapter. I have printed this out of PETG and PLA and both have worked just fine.
Post indicator for the gas and liquid posts on a 19l corny keg. Print one colour for gas and another liquid to easily tell them apart.
I made a small change to the rear latch from the original file: I lowered it by 1 mm and enlarged the hole by 1 mm.
Assembly and Print Instructions This is set up in such a way that you can have different colours for the left and right sides even with a single colour printer. Backplate Use backplate_textless.stl if you want custom text, use…
Dial Indicator Quick Release Mount for a Starret 3025-4821 dial indicator to fit a 250-000 quick release toolpost. Made to fit a 7" Mini Lathe and enables centering of stock up to ~ 80mm. I printed in PETG with 5 outer layers and added a…
Turn the Vane 5° for standard sized print bed. Use UV-Stable Material with good abrasive characteristics (e.g. PETG) If you want to use this on a boat Mast, consider that the colour you choose should be seen. Glue together the Base and…
Simple text sign model >> "CAR", "HALF" Size: 12 x 24 mm
Knobs with indicators (D-shaft + normal) for the Korg Volca series, designed for improved control with a slightly taller shape for smoother handling. The clear indicator shows exactly which parameters are active and how much they are…
You can attach indicator to the holder and move printer to the 4 corners to measure high of the bed. After adjust high and make it on the same level for all of 4 corners.
You can attach this bite indicator directly to your line. It is designed for glow sticks up to 45 mm / Ø4.5 mm. I printed it from cheap Glow in the Dark PLA The thread is in the beginning quite tight, but works fine if you give it a…
The OEM rubber tends to press against the lower plastic, causing slight misalignment. This extension prevents contact and keeps the components properly aligned.
🔥 Nozzle Size Indicators – Know What’s Installed (CV3DP)Stop guessing what nozzle is in your printer. I own a few printers and somtimes I forget what nozzles are in each printer. These Nozzle Size Indicators are designed to slide directly…
This is a simple magnet mounted indicator for the model below to show where it stands at the moment. I added a model for 4x2x2mm and 6x2x2mm magnets. The magnets need to be glued in.
A Gate Color Indicator in a ZEN like stairway garden IT shows to the Employs what CEO Mood is ON LOL “The GATE Colors and Walls are usaly not beside the the GardenDiorama” PRINT it as your size like smalest is 60mm roufly 3inches for good…
A version of my enclosure signage made to fit the printers frame itself. Useful if you are multiple people using the printer, or forgetful, this sign will quickly indicate the currently installed nozzle. I printed in PETG, 0,2 mm layer…
Scale to 1.12x to fit 28mm figures. Add a filament swap at layer 19 for the best effect, or just paint the top layer as I did.
Let's be honest, this is just a 20mm diameter ball. But it works! For those of you who have a decapitated live tree in your house at this time of year, you know you have to water it regularly. If it dries out just once, it will start…
We recently got a new dishwasher appliance and the old 3D printed clean/dirty indicator that I made years ago ( 1"x4") no longer fits the new washer's geometry. This model is my new design in the form factor of a 3 inch square. Project…
LoveCover with LEDS indicators. WARNING: the new Prusa LoveBoards no longer have LEDs, please check your board before printing this mod. You can see a video here:…
A strong, stable (very important) and very convenient dial indicator support that is set at the back side of the Tevo Tarantula X-carriage. I use it for manually leveling the bed, and to set the nozzle height at the right distance to get…
My kids mangled the toilet/bathroom lock indicator :( so I created a new one! This lock indicator is from a dutch lock, so your millage may vary. Use the supplied scad file to alter as needed. Indicator diameter: 31mm Total height: 13mm…
About This is a label carrier/holder for devices that are mounted in ø22mm holes. This includes buttons, switches, pilot lights, and other indicators. Such devices are usually found in the front cover of a control panel. This carrier is…
I plan on making additional tiles to the three original faces. The frame needs to be superglued to the base after the faces are placed and the sliders on top of them.
Empty Chamber Indicator / Safety Flag for MP5 platform. Designed so you can close the bolt on the flag and the receiver will not cut the flag's arm off. Hole included for attaching a lanyard, elastic, or keychain. REMOVE BEFORE PEW PEW!…
Removed the original text so you can put whatever you want. Made an ITA version for fellow spaghetti eaters :)
To design this mount I remixed TH3D Studio LLC's mount for their EZABL Bed lvl'ing kit and Humebeam's icarus-dial-holder-1.0.stl from his Icarus mod Picture still shows the prototype in PETG. The actual model I use is one I printed in…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
The Mitxela Precision Clock is a fantastic little kit, building a very precise GPS controlled clock. These are little 3D printed spacers you can use in place of the wooden spacers that come with the kit. The wooden spacers that come with…
Number pointer for the MMU3 to easily see which filament is in use
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant The metal piece on the side of my storm that houses the delrin ball was orange and didn't fit the look I was going for. I…
I really wanted a trap I could tell was occupied at a glance as I would have it set in the my porch most of the year round so I added a flag which pops up as soon as the inner door of the trap is lifted. This doesn't otherwise affect how…
Bite Indicator ! On the top indicator please cut it with a knife. Do not cut your fingers :-) Good luck !
Ich habe versucht einen möglichst leichten Bissanzeiger zu konstruieren, den man zwischen dem ersten Rutenring und Rolle in die Schnur einhängen kann. Er verfügt über eine Halterung für Knicklichter(L39mm / Ø 4,5mm). Um den Bissanzeiger…
