1 / 1
Messuhrhalter M14x1,25 Gewinde/Kerzengewinde / dial indicator mount M14 x 1.25 — zdjęcie 1

Messuhrhalter M14x1,25 Gewinde/Kerzengewinde / dial indicator mount M14 x 1.25

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Messuhrhalter M14x1,25 Gewinde/Kerzengewinde / dial indicator mount M14 x 1.25

Ocena
4,75 / 5
Polubienia
15
Pobrania
392
Wydruki
4
Wyświetlenia
1252
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Messuhrhalter zum einstellen des Zündzeitpunktes bei Motoren mit M14x1,25 Gewinde.
Ich habe den Halter mit PLA gedruckt, aber man sollte vielleicht eher zu PETG oder ABS greifen. So oder so gilt, einschrauben NUR per Hand.
Schichtdicke = 0,1mm, das Gewinde ohne Support drucken!
Zum klemmen der Messuhr wird eine M3x10mm Schraube benötigt und eine passende Mutter.

Dial inidcator mount for adjusting the ignition timing of an engine with M14 x 1.25 threads.
Can be printed using PLA, but maybe you should prefer PETG or ABS. Screw in by hand ONLY!
Layer thickness = 0.1mm. Print the thread without support!
One M3x10mm screw needed to clamp the indicator plus one nut.

Tagi