Messuhrhalter M14x1,25 Gewinde/Kerzengewinde / dial indicator mount M14 x 1.25
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Messuhrhalter M14x1,25 Gewinde/Kerzengewinde / dial indicator mount M14 x 1.25
- Rating
- 4.75 / 5
- Likes
- 15
- Downloads
- 393
- Makes
- 4
- Views
- 1,255
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Messuhrhalter zum einstellen des Zündzeitpunktes bei Motoren mit M14x1,25 Gewinde.
Ich habe den Halter mit PLA gedruckt, aber man sollte vielleicht eher zu PETG oder ABS greifen. So oder so gilt, einschrauben NUR per Hand.
Schichtdicke = 0,1mm, das Gewinde ohne Support drucken!
Zum klemmen der Messuhr wird eine M3x10mm Schraube benötigt und eine passende Mutter.
Dial inidcator mount for adjusting the ignition timing of an engine with M14 x 1.25 threads.
Can be printed using PLA, but maybe you should prefer PETG or ABS. Screw in by hand ONLY!
Layer thickness = 0.1mm. Print the thread without support!
One M3x10mm screw needed to clamp the indicator plus one nut.