Portable Nintendo Switch Adjustable Stand (rail mounted)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Portable, thin 15 30 45 and 60 degree stand for your Nintendo switch with a bit of bottom gap to allow USB C charging
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 86
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
What is it?
- Portable, same width as a joycon thickness
- Adjustable to tilts of 15, 30, 45, and 60 degrees from vertical
- Slightly a bit higher to allow for plugging in nubby USBc for charging, such as a U or L adapter
- Mounted on rail so it's very sturdy, with “pinch-to-detach” clip
Slice settings:
- 10mm-ish layers, otherwise it might be too tight or loose
- NO SUPPORTS NEEDED - every overhang adjusted for 40+ degree angle
- Up to you for strength, but standard slicer setting should be ok
Install instructions:
- Takes 2 pairs of standard M3x8 or M3x10 machine screws
- Screw it in
- Attach to rails
Why do I need it?
I want to replace the sad excuse of a switch stand, and I want to be able to charge and play at the same time
It doesn't fit!
I want different screws!
I want longer legs!
I want shorter legs!
Fix it yourself. I have the files available to copy here:
https://cad.onshape.com/documents/30b78621a242980696eead02/
Inspired by:
Doesn't copy geometry from, but shape was inspired by
https://www.thingiverse.com/thing:2250417 by takumus
https://www.thingiverse.com/thing:2337833 by Tokytome
https://www.printables.com/model/795735-unique-print-in-place-laptop-stand-super-portable