1 / 4
Top PTFE / Bowden Tube Passthrough Feeder for the Original Prusa Enclosure — zdjęcie 1
1 / 4

Top PTFE / Bowden Tube Passthrough Feeder for the Original Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Top center PTFE / bowden tube passthrough for the Original Prusa Enclosure

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of: https://www.printables.com/model/390434-top-plug-center-for-original-prusa-enclusure-with-

I wanted the tube from my drybox to be able to feed into the top of my enclosure and slightly slide back and fourth with the x-axis. This was a perfect solution! I scaled this for a 4.0mm tube so anything bigger won't fit. I also only use one piece secured on the top by rivets and don't sandwich two pieces together between the top like the original model. There should be enough room for the tube to freely slide back and fourth with no resistance. 


Print Settings: 
Infill: 15%
Perimeters: 2
Layer height: 0.2

Printed with Prusament PETG

Tagi