1 / 4
Top PTFE / Bowden Tube Passthrough Feeder for the Original Prusa Enclosure — image 1
1 / 4

Top PTFE / Bowden Tube Passthrough Feeder for the Original Prusa Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Top center PTFE / bowden tube passthrough for the Original Prusa Enclosure

Rating
0 / 5
Likes
5
Downloads
24
Makes
0
Views
310
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of: https://www.printables.com/model/390434-top-plug-center-for-original-prusa-enclusure-with-

I wanted the tube from my drybox to be able to feed into the top of my enclosure and slightly slide back and fourth with the x-axis. This was a perfect solution! I scaled this for a 4.0mm tube so anything bigger won't fit. I also only use one piece secured on the top by rivets and don't sandwich two pieces together between the top like the original model. There should be enough room for the tube to freely slide back and fourth with no resistance. 


Print Settings: 
Infill: 15%
Perimeters: 2
Layer height: 0.2

Printed with Prusament PETG

Tags