ratgdo V2.53i Case with "ratgdo V2.53i" text on the cover and magnetic mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Maksym ratgdo V2.53i Case
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Took the great ratgdo case originally designed by Maksym (THANK YOU!!!) and remixed it for myself.
I added text to the cover by adding the text “ratgdo V2.53i” and added a little space to make the cover a little less snug, so it will need (Qty 2) M3-14mm screws, and I also added holes for 8x3mm magnets to make mounting a breeze. I also widened the USB port hole on the case as it did not work with the supplied ratgdo USB cable.
I put all the STL's in a single 3MF file for PrusaSlicer. If you don't have an MMU3, you can change the text objects by selecting each one and clicking “Change Type" and changing it to a “Negative Volume” or delete the objects (faster) and reslice, and then the text will be recessed into the print if you want the branding. Also, I put in 9 magnet holes. You can fill the holes you don't want to put magnets in (or fill unused holes) by “Change Type" and change it to a “Part” then reslice. Honestly, a magnet on each corner is best, but if you're connecting it to an L bracket, you might prefer 3 magnets on one side to make it stick better.