1 / 3
ratgdo V2.53i Case with "ratgdo V2.53i" text on the cover and magnetic mounting — image 1
1 / 3

ratgdo V2.53i Case with "ratgdo V2.53i" text on the cover and magnetic mounting

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of Maksym ratgdo V2.53i Case

Rating
0 / 5
Likes
2
Downloads
19
Makes
0
Views
161
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Took the great ratgdo case originally designed by Maksym (THANK YOU!!!) and remixed it for myself. 

I added text to the cover by adding the text “ratgdo V2.53i” and added a little space to make the cover a little less snug, so it will need (Qty 2) M3-14mm screws, and I also added holes for 8x3mm magnets to make mounting a breeze. I also widened the USB port hole on the case as it did not work with the supplied ratgdo USB cable.

I put all the STL's in a single 3MF file for PrusaSlicer. If you don't have an MMU3, you can change the text objects by selecting each one and clicking “Change Type" and changing it to a “Negative Volume” or delete the objects (faster) and reslice, and then the text will be recessed into the print if you want the branding. Also, I put in 9 magnet holes. You can fill the holes you don't want to put magnets in (or fill unused holes) by “Change Type" and change it to a “Part” then reslice. Honestly, a magnet on each corner is best, but if you're connecting it to an L bracket, you might prefer 3 magnets on one side to make it stick better.

Tags