Covered Toothbrush Head Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My toothbrushes are in the same room as our toilet 🚽 😭 this was my solution to cover them while allowing them to dry…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My toothbrushes are in the same room as our toilet 🚽 😭 this was my solution to cover them while allowing them to dry properly.
I designed this for Oral-B toothbrush heads, but it should fit for most brushes, including full size ones. Good luck!
For the hinge, I used a 2mm rod cut to size, but I've also used a piece of 1.75mm filament before (the hole is 2.15mm in diameter) I used some 3M tape to attach it to the wall.
If you need a tighter one let me know and I'll try my best to reupload an updated model :)