Covered Toothbrush Head Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My toothbrushes are in the same room as our toilet 🚽 😭 this was my solution to cover them while allowing them to dry…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My toothbrushes are in the same room as our toilet 🚽 😭 this was my solution to cover them while allowing them to dry properly.
I designed this for Oral-B toothbrush heads, but it should fit for most brushes, including full size ones. Good luck!
For the hinge, I used a 2mm rod cut to size, but I've also used a piece of 1.75mm filament before (the hole is 2.15mm in diameter) I used some 3M tape to attach it to the wall.
If you need a tighter one let me know and I'll try my best to reupload an updated model :)