1 / 2
Makita vacuum cleaner holder - wall standoff for cyclone attachment — zdjęcie 1
1 / 2

Makita vacuum cleaner holder - wall standoff for cyclone attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for Makita vacuum cleaner holder by user PLG to accommodate cyclone attachment.

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Adapter for Makita vacuum cleaner holder by user PLG. The part attached to the front is from PLG's model. Below is link to that model. Required because I need additional standoff from wall to accommodate cyclone attachment. With this added, cyclone touches the wall lightly. 

Shaped to reduce likelihood of warping during printing. Used 3 mm x 16 tapping for all screws.

https://www.printables.com/model/517541-makita-vacuum-cleaner-holder

ABS, 3 perimeters, 20% cubic infill, 5 mm brim

Tagi