PowerPole Panel Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple PowerPole mounting solution not only for a HAM radio project.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 139
- Wydruki
- 2
- Wyświetlenia
- 630
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting bracket for a Anderson PowerPole connection commonly used in the context of amateur radio (HAM).
I mounted it from the back to a front panel, thats why the PowerPole connectors are not flush with the surface of the mount.
I used two heat inserts (5x4mm) with M3 screws to mount it and a M2 to keep the PowerPole connectors in place.
Print Settings:
- Nozzle: 0.4mm
- Infill: 20%
- Layer: 0.2mm
- No support
--
Einbaugehäuse für Anderson PowerPole-Verbinder, welche häufig im Amateur-Funkbereich genutzt werden.
Ich habe es von der Rückseite an eine knapp 2mm Frontplatte geschraubt, daher stehen die Anschlüsse etwas über und schließen nicht bündig mit dem Einbaugehäuse ab.
Ich habe zur Befestigung zwei Heat-Inserts (5x4mm) benutzt und mit M3 Schrauben fixiert. Außerdem hält eine M2-Schraube die PowerPole-Verbinder fest an Ort und Stelle.
Druckeinstellungen:
- Düse (Nozzle): 0.4mm
- Füllung (Infill): 20%
- Schichthöhe (Layer): 0.2mm
- Ohne Stützstruktur (support)