1 / 4
PowerPole Panel Mount — image 1
1 / 4

PowerPole Panel Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple PowerPole mounting solution not only for a HAM radio project.

Rating
5 / 5
Likes
17
Downloads
139
Makes
2
Views
641
Reviews
3

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Mounting bracket for a Anderson PowerPole connection commonly used in the context of amateur radio (HAM).

I mounted it from the back to a front panel, thats why the PowerPole connectors are not flush with the surface of the mount.

I used two heat inserts (5x4mm) with M3 screws to mount it and a M2 to keep the PowerPole connectors in place.

Print Settings:

  • Nozzle: 0.4mm
  • Infill: 20%
  • Layer: 0.2mm
  • No support

--

Einbaugehäuse für Anderson PowerPole-Verbinder, welche häufig im Amateur-Funkbereich genutzt werden.

Ich habe es von der Rückseite an eine knapp 2mm Frontplatte geschraubt, daher stehen die Anschlüsse etwas über und schließen nicht bündig mit dem Einbaugehäuse ab.

Ich habe zur Befestigung zwei Heat-Inserts (5x4mm) benutzt und mit M3 Schrauben fixiert. Außerdem hält eine M2-Schraube die PowerPole-Verbinder fest an Ort und Stelle.

Druckeinstellungen:

  • Düse (Nozzle): 0.4mm
  • Füllung (Infill): 20%
  • Schichthöhe (Layer): 0.2mm
  • Ohne Stützstruktur (support)

Tags