Mister Pi FPGA R2 "MegaPack" Case 3mm flatpack (3D printed, ignore the photo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Properly sized for the fall 2024 (and onwards?) release from RetroRemake
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Fully 3D printed version.
This is for the latest MegaPack R2 release (fall 2024); specifically I ordered my board on Nov 18, 2024.
- Also added better 3D printed buttons
- Also added some “hollow standoffs” if you don't have extras for the top, and would rather just use a longer m3 (16-20mm) bolt (like me).
The (16-20mm) m3 bolts OR (12mm) standoffs + shortm3bolts are the only part you should need that isn't printed or lasercut outside of what comes in the original megapack (use the megapack-included phillips screws on the bottom)
See here for the lasercutter version
PSA: I have not actually printed this since I woodcut mine, but it should be identical.