Mister Pi FPGA R2 "MegaPack" Case 3mm flatpack (3D printed, ignore the photo)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Properly sized for the fall 2024 (and onwards?) release from RetroRemake
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Fully 3D printed version.
This is for the latest MegaPack R2 release (fall 2024); specifically I ordered my board on Nov 18, 2024.
- Also added better 3D printed buttons
- Also added some “hollow standoffs” if you don't have extras for the top, and would rather just use a longer m3 (16-20mm) bolt (like me).
The (16-20mm) m3 bolts OR (12mm) standoffs + shortm3bolts are the only part you should need that isn't printed or lasercut outside of what comes in the original megapack (use the megapack-included phillips screws on the bottom)
See here for the lasercutter version
PSA: I have not actually printed this since I woodcut mine, but it should be identical.