2.8 LCD Touch Display Holder for Rack servicing (Raspberry Oi, Arduino, etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a custom 2.8 lcd mount, for a raspberry pi electronics rack.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Newly Updated**
I wanted a LCD screen for my raspberry pi rack cluster (with l298 motor controller) , that was appropriately sized for use for my planned 3d printer control center. I took a look and used a smaller portion of the remixed model notated here https://www.printables.com/model/866975-waveshare-28-touchscreen-holder-for-voron-v0 and rebuilt it from the ground up, to support a different position, a larger foot print, and the ability to be properly mounted to the rack mount of my choosing which happens to be this https://www.printables.com/model/759993-raspberry-pi-4-5-mini-server-rack-case
I have included 1 model variations:
My unique models include 1 body:
- NEW**
- Waveshare 2.8" Touchscreen holder for the mentioned rackserver, side mounted.
- Includes appropriate mounting points, and holes to allow for easy securing to rack.
- Has appropriate sized supports, and modern look.
- Designed to work specifically with this rack that you can print from here
- https://www.printables.com/model/759993-raspberry-pi-4-5-mini-server-rack-case
- I love this raspberry pi rack made available from jonthemiller
- Waveshare 2.8" Touchscreen holder for the mentioned rackserver, side mounted.
I have made several OTHER remixes of this raspberry pi rack, including a screen, dual fan support, and an upgraded raspberry pi 3+ tray with GPIO access. Check out those models if the mood suits you!
I hope this is helpful!
Please leave a like, rate, add, and leave me a comment about your thoughts!
- Chris