1 / 1
small rc wheel for drifting in non drift rc cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i designed this simpple wheel to make my rc car drift its for a 2.5 mm drive shaft the wheel diameter is3.8mm and 14mm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
print with 30% infill after print might need a lil sanding remember to print 2 of these not just one one prints for 1 hour