1 / 3
Pastamatic Remix: 5Kg to 5Kg Spool Winder — zdjęcie 1
1 / 3

Pastamatic Remix: 5Kg to 5Kg Spool Winder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a modified version of @GekoPrime Pastamatic Winder. Upgraded to wind 5KG size spools.

Ocena
0 / 5
Polubienia
21
Pobrania
216
Wydruki
0
Wyświetlenia
1345
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a modification for my needs. I'll put it here just in case someone else needs one too.

I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my print uses 3.5-4Kg per print! I always have a little bit left over. So here we combine multiple spools to make a larger one.

Changes from OG:

  • Taller Cradles
  • Longer drive train
  • Stonger spindles
  • Longer F/R screw

This design requires 2020 aluminum extrusion due to the overall size of the machine.

The width between the cradles needs to be ~217mm. So make the 2020 cross-member beams ~178mm long (7in.) This will make the winding screw in the center of the 5Kg spool.

Printed Parts:

1x drive_cradle_back
1x drive_cradle_front
1x passive_cradle_back
1x passive_cradle_front
2x supply_cradle
1x leadscrew
1x leadscrew_block
1x leadscrew_tooth
1x spool_driven
1x spool_passive
2x spool_long
1x double_idler
8x idler
1x screw_strap

Hardware:

2x 2020 aluminum 450mm long
2x 2020 aluminum 178mm long
4x 2020 corner connectors
17x 608 Bearing
M5 bolts
M5 hammer nuts (for 2020)




 

Tagi