Pastamatic Remix: 5Kg to 5Kg Spool Winder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified version of @GekoPrime Pastamatic Winder. Upgraded to wind 5KG size spools.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 216
- Makes
- 0
- Views
- 1,345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike

This is a modification for my needs. I'll put it here just in case someone else needs one too.
I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my print uses 3.5-4Kg per print! I always have a little bit left over. So here we combine multiple spools to make a larger one.
Changes from OG:
- Taller Cradles
- Longer drive train
- Stonger spindles
- Longer F/R screw
This design requires 2020 aluminum extrusion due to the overall size of the machine.
The width between the cradles needs to be ~217mm. So make the 2020 cross-member beams ~178mm long (7in.) This will make the winding screw in the center of the 5Kg spool.
Printed Parts:
1x drive_cradle_back
1x drive_cradle_front
1x passive_cradle_back
1x passive_cradle_front
2x supply_cradle
1x leadscrew
1x leadscrew_block
1x leadscrew_tooth
1x spool_driven
1x spool_passive
2x spool_long
1x double_idler
8x idler
1x screw_strap
Hardware:
2x 2020 aluminum 450mm long
2x 2020 aluminum 178mm long
4x 2020 corner connectors
17x 608 Bearing
M5 bolts
M5 hammer nuts (for 2020)