204 models
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder "…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
English: This Spool Holder was inspired by the Horizontal Side Filament Holder by CdRsKuLL, which was one of the first models I printed on my X1 Carbon. But for the most common filament types I always use big Spools, so I changed the…
This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…
I have enlarged K2 Kevin's Spool Holder for a 5KG Spool. I installed two screws to keep the smooth rods in place from the underside of the side. You may want to pre-dill or use self-tapping screws. Note the Filament guide fits tight, I…
Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…
Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…
Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…
I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own. It is super simple and the rolls don't have any issues spinning on it. You can also add a little Kapton tape to the top edge…
You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on which it stands. The filament rolls easily due to the large rolls. Only 3 parts to print. You need the ball bearings. Two different…
As there doesn't appear to be any spool holders using bearings in this formfactor which fits 5kg eSun branded rolls, I decided to modify a design and add my own touches to make it easy to switch rolls over with just two pieces. Print: 1 x…
Hey all. I wanted to upgrade my spool solution to these large and heavy spools to something with bearings. So, without re-inventing the wheel I sourced the internet for inspiration. I found Polymaker has a model similar to this, but…
Filament spool roller for Zyltech 5kg filament spools. Hardware required : 4 - m3x16 (or longer) bolts 4 - 608 bearings Print tips : 1 - SpoolBase 2 - SpoolFrame 2 - SpoolRoller No supports required but you may want to use a brim for the…
Hang heavy equipment on your Honeycomb Storage Wall with this inserts. The insert can withstand forces up to 15 kg and does not detach from the HSW. I have made two variants, M4 and M5. Update: 04.03.2024 nut M3 added, can only be locked…
Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…
I liked the 5kg Spool Holder by gfursu, but wanted to have an axle riding on 2 608 bearings. So i designed an adapter that fits in the slots for the old axles and can hold an 608 bearing. Lastly i added an axle and an insert for the spool…
An oversized spool holder for xxl sized spools. Nothing too fancy. Doesn't feature any type of bearings, or fancy features. I needed a plain and simple spool holder for Polymaker's 5kg abs spools, and threw this design together in F360.…
These new wheels for the original Prusa Lack Enclosure Spool Holder consist of 608 ball bearings (22 mm x 7 mm). Unlike other solutions here the filament spool rolls directly on the metal bearing surface minimizing noise, friction and…
A 25kg/45lbs cast iron plate scaled down to make it more portable. Diameter: 45mm Thickness: 3.75mm Weight tolerance: +/-3% For training use.
I had a lot of trouble with too much friction with the existing model, and needed to tweak it to prevent my extruder from skipping steps. While doing so, I ended up re-modeling everything from scratch with the existing model as a base.…
This is an adjustable spool holder that I designed for poly maker 5kg rolls, which will probably work on other brands as well. It is adjustable, so you can resize for 3kg and 1 kg rolls as well. The bearings are 608 6-6-2025 Hello, I have…
spool holder for large spools, designed around 5kg spool measuring 30 cm in diameter additional parts required -roughly12"(30cm)of 1/2" EMT electrical conduit or other dowel/shaft with roughly A 18mm OD -4 M8X30-35mm or…
Stáhněte si můj model držáku cívek pro 3D tiskárny Original Prusa MK4 a MK3S+ zdarma. Bez problémů se na něj vejdou cívky s filamentem o průměru až 30 cm a hmotností až 2,5 kg.
Polymaker 5kg Spool Holder designed and printed by Dennis from Toronto Hardware required: - 4x 3Mm hex nuts - 4x 25mm 3mm bolts - 8 bearings 1/2” with 1/4” ID Bushing goes on bolt side on axel. Axels printed at 40% Rollers two piece. Line…
I was in need of a 5kg spool holder and found the Polymaker 5kg spool holder by UB3D here on Printables. After making it I quickly discovered that the spool holder shaft was too narrow for the Sunlu spool, causing the spool to drag on the…
This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…
I jumped on the 5kg spools from ambrosia as soon as I saw them, love not changing spools but figured I should print a legit spool holder after limping along the first roll. Super simple print, I used ABS but anything should work fine.…
Finally I added some rubber pads 15x2mm: https://s.click.aliexpress.com/e/_omEYj6G (Affiliate Link)
I have designed this wall and roof filament holder, mainly for Esun PLA 5KG spools, but it can be used with 1KG spools with other adapters. Up to you if you want to change over the bearings or buy another set. The hole through the holder…
I spool holder designed for 2.5KG fiberlogy spools. 110mm between each side.
After not finding a great spool roller that would fit a variety of spool sizes, I decided to come up with my own. After a few ideas and a couple iterations, I came up with this one! It works with spools from 100mm diameter to 300 mm…
Meet the upgraded 5KG Spool Holder, E ngineered to handle heavy-duty filament spools with confidence. Designed with a reinforced base and side walls, this holder is optimized for smooth feeding and long-term durability. Perfect for large…
Design Concept The 5kg Filament Spool Roller is designed to facilitate smooth unspooling of filament during 3D printing. Its simple yet effective design aims to minimize tangling and maximize efficiency. Use This roller is ideal for…
This is a simple yet robust filament spool holder designed to accommodate spools of any size, from 1kg to 5kg and maybe more. Its simple design is easy to assemble and requires minimal parts as well as not taking up lots of space when not…
For casual use, 1kg spools are nice. i still use my old https://www.thingiverse.com/thing:1533722 or https://www.thingiverse.com/thing:1864589 spool holder designs for those. But when you do heavy duty 24h faceshield printing (or…
Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…
I was annoyed of my current spool holder, as I had to adjust it to fit filament rolls of different widths. With this design I can just put a roll on it and swap them easily. The design requires: 4 M6 Screws 4 606ZZ bearings The bearings…
Raises the top of the PolyBox to fit 2.5kg, 30cm filament spools.
I got tired of switching spools out on bigger prints and made a basic spool holder for the 5kg polymaker spool. I made the original out of petg but I'm making the next one out of abs. It is working well and I have included the STEP file…
A few modifications to allow the Pastamatic to be used for 1kg and 5kg spools. I raised the height of the source spool by 35mm with a wider smooth bracket riser, but it fits in the same area. The crossbars, target spool female threaded…
Spool holder for 5kg spools of filament from Zyltech. May also fit 5kg or 3kg spools from other vendors. Print on the flared knob end with a brim. I used PLA and it's fine, but may be printed with PETG if so desired. After printing,…
There are two roller versions. V2 has a flair on the roller to prevent spool from rubbing on sides. Both can be printed vertically without any supports and was designed for standard 608 bearings. Add bearings into both rollers then place…
Filament-Rollen-Halter 0,25-5kg - neue Schwerlastversion Version05: Endlich habe ich Zeit für den Abstandshalter gefunden. Ihr stellt die Rollenhalter einfach darauf und schon ist die ganze Sache sehr stabil. Wenn der Abstandshalter…
Remixed for use with 2020 extrusions and 2 mounting points for m5 + t-nut and made cap mountable with m5 as well.
This is a spool holder project I have been playing around with for awhile. I had my smaller spools hanging from the rafters using an old Ender 3 spool holder, but I needed something a lot larger to hold my 5Kg spools up there. I found a…
Modified to fit wider 5kg Polymaker spools. I ended up super-gluing the half rollers together since making them longer added some sag.
After using up the filament on the spool, the spool itself is usually left empty and considered useless, often discarded. However, this is one way to repurpose your empty spool for organizing various screws, nuts, and other small tools.…
I built for the community a 5kg or 10kg spool holder. This should be a fairly easy print and is designed with easy to modify files and easy to replace inserts to make printing easier and maintenance easier. If you redesign this model…
I run a very busy printing operation & I mostly print off of 5 kg PETG spools. I've designed what I think is the best, versatile spool holder option for my XL printers. it looks simple at first glance, however, please read the below, as…
Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…
Spool Holder Assembly to Mount bigger Spools inside the Enclosure. Tested with 2,5kg Spool 100mm wide from Extrudr. BOM per Spoolholder (Double for IDEX) 1x 2020 Extrusion 260mm long 1x Right or Left Spool Holder Mount (printed Part,…
A spool adapter made for larger heavy filament spools such as Filamentive's 8.5mm reels. Will fit other brands with internal holes that are 36mm. I use a 165mm wide spool but will fit wider spools up to ~200mm. This spins perfectly smooth…
Spool adapter ring for a 2.5 kg reel with a diameter of 249mm/Spulen Adapterring für eine 2,5 kg rolle mit einem Durchmesser von 249mm.
Seems there are not many filament dry/storage boxes for big 2.5kg spools - so I made one. It's based on an Ikea cake carrier ( https://www.ikea.com/de/de/p/krispig-tortentraeger-20336407/ ), which turned out to fit quite well around 2.5kg…
For a 30 dia x 15 cm spool with ~6 cm hole (Sunlu 5 kg spool). It will fit on a 220 x 220 mm plate. (barely) Use ½ inch conduit cut to 22 cm lengths. There are holes to set screws into the cross rails to firm them up. I am using M5 bolts…
This remix builds on an existing great design, but just scales it up to fit larger 12"/30cm spools, commonly used for 2.3kg, 2.5kg, or 5lb spools. I have primarily used it with spools from IC3D and Printed Solid, which are roughly 4.25"…
weight plates with different weights, designed to be able to customize the weight of a squat or bench press rack model
Split the model in your slicer and place both thread features facing up. Secure base of spool holder to the printer in the desired location using the M4 bolt and nut from the original spool holder. Thread the second portion of the spool…
Wandhalterung für Filamentrollen mit 2,5kg Filament Gedruckt habe ich dieses Teil mit 5 Wand und 5 Oben-Unten Layer und 20% infill. Aus PETG Benötigt werden 25mm Alu Rohre oder vergleichbares. Keine Unterstützung nötig Gerne Konstruktive…
Updated 20/1/26 New File has wider section for dual bearings to allow for wide cheeks on the larger spools Extra parts: use 4 skate bearings per dog bone. Total 8 for twin bones. Extra longer 8mm bolts, make 8mm longer to suit over BOM…
This is the longer, 5KG spool version. For the 1KG version, click here . Designed to be cheap, strong and quick to print. The top is extra large in order to nest them together during print, which also means they'll hang on just about any…
Updated June '26 - Increased tolerances for print-in-place hinges. My 5KG spool holder. Features: Small foot print, minimalist looks. Support for mutiple spool sizes Print in place hinges for top loading of new spools Four 608 bearings…
This is my attempt at replicating a 1/5 scale model of a Titex Calibrated Weight Plate set. Everything can be printed, however I found that the plates were too heavy for a printed barbell. Use a 6mm x 300mm aluminum rod in place of the…
This is a modified modular spool holder shaft for the FormFutura Modular Spool Holder to fit eSUNs 5KG spools with a 30mm opening. The shaft is 28mm in diameter so it will fit other spools with a 30mm center hole. Due to the size of the…
I printed three large spool holders but not a single was able to work well with the very soft 2.5kg Polymaker Polyterra or Greeny+ cardboard spools, so I optimized Thejirals great spool holder to fit more different spools and even this…
Halterung für 5 kg Gasflaschen, z.B. im Wohnmobil. Rutschsicherung. Die untere Ebene ist 16mm hoch (passend für Pössl)
I needed a spool holder to mount on the side of the Prusa XL that would support the 5KG spools from MatterHackers. Those spools have a smaller than usual center hole. Of course, this will also work for smaller spools as well. I had some…
You will need additional hardware for this to work x4 M7x45mm nuts and bolts or longer x12 M7 washers (3 for each corner), x8 skateboard bearings (2 for each corner). Use the washers to space out the bearings as needed. I have noticed the…
Print horizontally (on the flat side) 6 Walls / Perimeters Infill: 25% Gyroid 0.2mm layer height Fast printer? Use a “strength” preset or lower the print speed (this improves stability) The holder supports rolls with a width of up to 120…
I recommend 10 walls and 55% infill for this spool holder since it'll be carrying 5kg spools. It will almost certainly hold the weight with less structure than that, but I prefer it to be beefy. Print this model laying flat with the legs…
A two piece adapter for small 0.25kg filament spools. It slides in the center of the filament spool and makes it fit the AMS like a full sized spool of filament. It takes ~1:15 minutes to print on my Bambu lab P1s with standard settings.…
A spool holder for a 5kg filament spool. parts needed 6202-2RS bearings M12 nuts and bolts
I go through so much filament in my class that I feel like I'm changing the roll every day. So, I purchased a 5kg roll of black for my Lulzbot Taz 6 printer and quickly realized I would need another solution to mounting it and making sure…
Pro montáž budete potřebovat vytisknout: 2x Položku1 (držák válce) 2x Položku2 (držák profilu 20x20) 1x Položku3 (průchodka filamentu) Dále je třeba: 1x plastová trubka o průměru 50mm a max délce 475mm 2x plastový nebo hliníkový profil…
you will need Print out : 2 of main.stl 2 of lid.stl 2 of printable nut.stl (print on 45 degree side) 1 of handle (print upright with wide brim) Buy: 400mm M12 threaded rod 12 M3x10 screws 12 M3 nuts 20kg concrete bag Glue the nuts in the…
A holder for 100mm wide spools with offcentered bearings to eliminate spool wobbling druring print.
Where are all the 5kg filament spool dry boxes? DIY Build video: https://youtu.be/h-Q685tzcTM You may find that there are few options for 5kg spool-printing ballers like yourself. So let's roll up our sleeves and make a super effective…
Tool holder for Sledgehammer 4.5kg/ 10lb. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 50.03mm W -91,228mm H - 62,5mm We…
5kg filament holder to fit on a 22x22 cm print plate. Very simple and easy to print.
The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…
Print with PETG/ABS/ASA Print side down. Use supports
Spool roller/holder for 5kg spools (such as from zyltech http://www.zyltech.com/zyltech-filament/5kg-filament-spools/ ) You will also need some M8, M6, M3 nuts and bolts, and 1/2 inch (18mm) EMT conduit OnShape document (it's in the…
I bought refills that was 1,5 kg. The original MasterSpool Remix from 87squirrels, was not big enough. I made this one is Ø250mm in outer diameter so my refills would fit nicely. This is my first version. It feels a litle weak and…
Extends the roller to accommodate large 5kg rolls. Should still be compatible with most rolls on the market. Added a bearing distancer if you want to tighten the original bearings without adding friction. Be aware, I removed the bearing…
Added 100mm to the support pin and roller. Shaved the ends of the roller to fit inside 32mm diameter spool holes.
Drucken mit 40% Füllung und 6 Wänden Mit M12 Schraube verstärkbar bei höherem Gewicht Modularer Montagefuß https://www.printables.com/de/model/763067-filamenthalter-fur-filamentrollen-mit-50mm-innendu
This is a mount for 5kg load cell. One piece mounts the load cell to a vertical surface, like a table leg (LACK enclosure table leg is my use case). The other piece allows the user to place a filament spool onto the load cell to weigh it.…
Yet another TUSH holder specifically designed for 2.5kg filament spools I tried printing it with PETG, but PLA should work just fine
wall mount spool holder-5kg and rod
This spool adapter is a simple ring to fit the 0.5kg eSun spools in the AMS and extend them to a 1kg full size spool. Optimal if you use respool filament or you want to rewind filament from other spools. Simply print the part with…
Overview I wanted to be able to use 5kg spools (even the largest ones I could find from Polymaker and California Filament - see bottom of page for dimensions) to get bulk savings on basic filament, and honestly just stop having to swap…
My new welder dident come with the adaptor to use 5Kg rolls of wire so I made my own. The hole in the pin is to thread in a 3mm bolt to reinforce it. Tolerances are deliberatly a bit loose so you can print this thing really fast. Print…
The model made for Kexcelled's 0.5kg wire reel only needs to be printed in two, and can be easily recycled on Bambu Lab AMS.
I constructed a holder for strapping my 5kg gasbottle in my RV down. It can be screwed down and fits strap with 2,5cm width. No Supports needed.
Assembly Video Story Hello there! I couldn’t find the perfect spool holder for my massive 5 kg Sunlu ABS spool, so I designed my own: adjustable, portable, and lightweight This spool holder was made to use spare bearings from my Voron…
Halterung für zwei Filament-Spulen am 40x40 Profil Dieses Projekt hat das Ziel, eine flexible und modulare Halterung zu entwickeln, die an einem 40x40 Aluminium-Profil eingehängt werden kann. Sie soll zwei Filament-Spulen aufnehmen und…
This is the official masterspool design for 2.5kg polar filament refills. We've included the STEP file so you can make modifications and remixes if you want. This design is for personal/business use, but it is to remain free and…
Using KitchenAid flour mill usually means unnecessary spilling as the bowl is too low. So what is the easiest, simple solution? A perfectly fitting funnel to guide every single particle into a wide-mouth ball glass. Print with PETG as…
Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.
