1 / 4
5kg ZYLTech Big Texas Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modeled this up to hold ZYLTech Big Texas spools with no additional hardware or assembly required.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 56
- Makes
- 0
- Views
- 412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I recommend 10 walls and 55% infill for this spool holder since it'll be carrying 5kg spools. It will almost certainly hold the weight with less structure than that, but I prefer it to be beefy.
Print this model laying flat with the legs and spool rod facing up.
The original had a .5" fillet on the back face that caused some stringing, I've reduced the radius to .1" to avoid that cosmetic issue.
Scaling to 101-102% might be recommended to keep the spool edges from lightly dragging on the feet of the spool holder.