5kg ZYLTech Big Texas Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modeled this up to hold ZYLTech Big Texas spools with no additional hardware or assembly required.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I recommend 10 walls and 55% infill for this spool holder since it'll be carrying 5kg spools. It will almost certainly hold the weight with less structure than that, but I prefer it to be beefy.
Print this model laying flat with the legs and spool rod facing up.
The original had a .5" fillet on the back face that caused some stringing, I've reduced the radius to .1" to avoid that cosmetic issue.
Scaling to 101-102% might be recommended to keep the spool edges from lightly dragging on the feet of the spool holder.