Low profile quick-swap Spool roller holder; Also for wide rolls of filament 2.5kg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament can be quick-changed. Wide roller for large rolls. Bearings snap in place. Quick assemby and disassembly.
- Rating
- 4.5 / 5
- Likes
- 13
- Downloads
- 125
- Makes
- 2
- Views
- 1,623
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was annoyed of my current spool holder, as I had to adjust it to fit filament rolls of different widths. With this design I can just put a roll on it and swap them easily.
The design requires:
- 4 M6 Screws
- 4 606ZZ bearings
The bearings snap in place and do not come loose when lifted. You might want to add a washer between the plastic cylinder and the bearing.
The 70mm cylinder is for normal 1kg rolls and the 110mm for 2.5kg.
Printing the cylinder: I print it standing and use a 5mm brim to add some grip to adhere to the printing bed.
Let me know if you want to use a different bearing or need another width.
I am not sure how well the internal threats work on other printers. I printed mine with a 0.4mm layer height and a 0.6mm nozzle. They were ok. Feedback on the design is very welcome! :)