Low profile quick-swap Spool roller holder; Also for wide rolls of filament 2.5kg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament can be quick-changed. Wide roller for large rolls. Bearings snap in place. Quick assemby and disassembly.
- Ocena
- 4,5 / 5
- Polubienia
- 13
- Pobrania
- 125
- Wydruki
- 2
- Wyświetlenia
- 1623
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was annoyed of my current spool holder, as I had to adjust it to fit filament rolls of different widths. With this design I can just put a roll on it and swap them easily.
The design requires:
- 4 M6 Screws
- 4 606ZZ bearings
The bearings snap in place and do not come loose when lifted. You might want to add a washer between the plastic cylinder and the bearing.
The 70mm cylinder is for normal 1kg rolls and the 110mm for 2.5kg.
Printing the cylinder: I print it standing and use a 5mm brim to add some grip to adhere to the printing bed.
Let me know if you want to use a different bearing or need another width.
I am not sure how well the internal threats work on other printers. I printed mine with a 0.4mm layer height and a 0.6mm nozzle. They were ok. Feedback on the design is very welcome! :)