Liczymy pasujące modele…
DE Beschreibung: Passend für das Axial SCX 10 III Chassis. Eine verbesserung für die AXI232017 Wild Boar Antriebswellen. Das Mittelstück wurde so lang wie möglich gemacht um die Kraftübertragung zu verbessern. Die Antriebswellen sind im…
In an act of criminal engineering, the designers at BMW decided to locate the cupholders on the F22 BMW slightly recessed under the dashboard. As a result, I must listen to my wife complain every time she gets a Big Gulp. Fortunately I…
Now you can sort the screws directly into practical bins! Use my d3 bins (d2 wave can be used for 40 & 35 mm slots) to keep them separated. I found that the upstream handle caused binding, so I recommend using the “contour grip” instead…
After my son got a rock tumbler for Christmas, our interest was sparked enough to end up purchasing the Harbor Freight rock tumbler (Central Machinery). This rock tumbler has many flaws but with some 3d printing and a little know how,…
.4 nozzle. .2 layer height. Default print settings. There were a couple remixes of the top that fixed problems so I combined them and added my own fix. @zktec_3322325 fixed the entire top for better stacking but changed the top to a…
I bought a fanatec universal hub V2 and was not happy with the shifter panels. Their arrangement regarding to the wheel (I have quite a large one with some distance to the hub) felt off. So I made new shifter panels and included counter…
Introduction I love this design. It's great, but I had some issues I needed to address. Thank you to GunplaMark for making my life easy by publishing the STEP files. I've made a number of changes from the original design: The original…
Prints without support. You may need to rescale it by 0.5% + or - to really fit, so print one and test it. PLA and PETG working fine printed in 0.15mm
assembly guide and hardware kit Included iron sights are held on with friction, adjust scale% in slicer if fit is too tight/loose https://blasterhub.com/2025/12/acorn-armaments-signet-build-assembly-guide/…
I created these accessories to make using my Watersnake ASP 18lb trolling motor a bit easier on the water, and address some issues I found installing on my Pelican kayak. The motor and mount are a great value, and instead of using PVC…
Must be printed in PETG as a base minimum ABS/ASA or Nylon Carbon preferable Be careful when installing the cables/fans in order not to short the board There is no need running these at 100% (Only 20% is enough for the most job)
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
I love the original idea, and the main design of the lamp, but I improved the look. For the best look two filament changes are recommended. (The photos show the tile printed scaled down to 80%, since my whole Hextraction set is 80% scaled…
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
Got tired of having to deal with poorly design Christmas Tree Stands so I decided to make some improvements to an old commercial unit I had kicking around. My stand originally consisted of four L-shaped bolts to secure to the tree trunk.…
Apthebold's cities improvements tracker is a nice compact design. However, I wanted to save more time printing by sizing them down. Rather than 3d printing the text, I decided to remove one dimension; now the labels are 2,5 by 1,5 cm…
Merge between Sunlu FilaDryer S2 Improvement Wedge and UBBI - See remixes
Parts to improve the lid of the Orange 30. Should snap in place but use glue (copious amounts recommended) if you plan to remove the rubberbands holding this travesty of a lid together. Makes the lid look a bit nicer too. I realized that…
DE Beschreibung: Passend für das Axial SCX 10 III Chassis. Eine verbesserung für die AXI232017 Wild Boar Antriebswellen. Das Mittelstück wurde so lang wie möglich gemacht um die Kraftübertragung zu verbessern. Die Antriebswellen sind im…
Humidity and temperature meter housing mount for Creality enclousure. Improved attachment to the Creality case tube. Sunlu PETG, Support: tree, auto, organic, on build plate only. Infill: 25%, Wall loops 3.
Liked the original, thx for the upload Printess … however, after printing had some issues with it so I reworked it for myself and decided I would post here in case it helped others: Easier more enveloping fit front cover no glue stays…
Hi I created this remix from the original framework mainboard to adapt a additional way to cool the mainboard. As I like the implementation of a Display I implemented on In the bottom. This also creates space for a controller to monitor…
Avant toute chose, toutes mes félicitations à Rocco's Stuff pour cette excellente conception et pour le plaisir que procure l'impression et le montage de ce modèle. Comme le précise Rocco's Stuff, ce n'est pas un modèle pour débutant ; sa…
Dust port for Wnew router fence from China and Rutlands from UK Will requires DN50 tube from the dust port to the existent dust port from fence
The remote control has very sensitive capacitive buttons. You can hardly touch them without one of the motors starting up. Operation without looking is not possible as the buttons cannot be felt. This cover eliminates the above-mentioned…
when I printed this model in PLA, I was unable to install the charging puck without breaking the top plate apart. this modified top allows for easier installation of the charging cable without stressing the part. slide the disk in from…
This remix improves the original transport handle design on the Original Prusa Enclosure. It was immediately apparent that the original design concentrates stress poorly on a generally weak joint of the bolt and steel profile.…
A typical foil socket requires both an 8mm wrench and a screwdriver to fasten the sockets. The wrench is needed to keep the hexnut in place while you use the screwdriver to fasten the socket (see picture of an unmodified socket). I find…
Use rubber as it is depicted on image. There are no special requirements for printing. Brim is useless.
I started with original model that was a great idea to give more functionality to the container. I also liked that it is made from 2 or 3 parts instead of single print. The problem however with 4mm inserts is that they push out the…
Hello, Welcome to my profile, full of models and miniatures :-) I have a stand for you, a holder for Playstation 5, PS5 games. The games fit beautifully and the logo is compatible with the original. There are many improvements in this…
English description (deutsch darunter) These parts are used to tidy up the colonies and uprising box, and there is then a place for all the material. All boxes are printed as shown in the picture, black, gray and in player color. The…
I used the already modified main plate, which prevents the filament from getting stuck. I added protection for the load-dell sensor, which can be damaged when the filament is wound on the gear. Reason: Getting the filament stuck and wound…
New parts to compliment the excellent model created by Cameron: Fully Printable Pottery Throwing Gauge I recommend using his improved “Gauge Bolts Stronger STLs” for the bolts All preferred parts designed to be printed in Flex. I used…
Небольшое улучшение для вертикальной сушилки Марта (модель не помню), чтоб печатать прямо из неё. Модельки под трубки ПТФЕ и и крепежи на стенку не мои, брал с интернета, ссылку на скачивание прикреплю в конце статьи. Штангу с накладными…
This is a few improvements I made for mmsaxer1998's excellent adapters for the Nikon Super Coolscans. The first is a support for the rear spool that screws into the back of the scanner. Created this because I keep having issues with it…
some slight improvements, a small slot to fix a cable (with a knot) and sorta parametric design (only OD works)
The top part of the snap buttons only has a universal riveting base, which is for the largest size they sell. The smaller rivets shift and move on it. After having to redo a single rivet 3 times because it always shifted 2mm, I decided to…
Main issue with the ChuckIt! grip on SOME models is that they are slippery, have no finger grooves, and taper upward instead of downward. I feel like I have to really grip hard to hold on firmly when I use it. And a firmer grip increases…
The same model made by VincentW with a little improvement for headsets with foam on top.
I created the inverter/sound directional adapters (not really sure what to call it) to improve the sound quality when having my HP P34hc G4 monitor standing in an open area without a wall behind. Can be attached with glue our double-sided…
A bold, fantasy-themed mug featuring elements from Juggernaut’s armor, mask, and katana — creating a functional yet ornamental drinking vessel.
My wife needed a stand for her glasses and phone, so I took a design “ Bed Side Phone and Glasses Stand (Clip On) ” this to clip on to the side of her bed. this version broke easily because of the clips were weak. The attachment point is…
This is not a bad blaster when you get past the fact that it's still labeled as in beta. I especially enjoy the mag release mechanism, and the ability to use either angled or straight magazines. If you have small hands I might recommend a…
These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…
Another practical construction is an improved oil dispenser. Unfortunately, the original oil bottle had a non-standard neck diameter, and I couldn't find a dispenser with a corresponding diameter that would hold firmly in the bottle. I…
Customized version of http://www.thingiverse.com/thing:1074513 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1074513 Instructions Using the following options: topFlare = 15 diameterOfBase = 26 topHeight…
I always care to design thinking the best way to possibly omit the need of support in printing, so I got use to elaborate in mind also the slicing before to even run the slicer program. I draw this basket type of box initially even with a…
Requires 4mm PTFE tubing, same stuff that your printer uses. ts kinda goated oh yeah also print catch3 out of TPU cuz it's just better
Some improvements : MMU version for the ‘coinface’ wich let you choose 3 colors for the body, inlay, and arrows Fixed ‘flap’, I was never able to mount the original one Easier to mount ‘coinface’, redesigned legs and clip for an easy mount
I wanted a different way to store the power cord instead of letting it dangle with a cable clip. These pieces use the existing screws and holes in the saw frame. No modifications or extra hardware for mounting. One right side part is a…
Bang! Life Counter Simple Improvement It's a magazine with six rounds and a stand. Once placed on the stand, the magazine can be screwed on.
Support on build plate needed. printing is possible on either side.
In an act of criminal engineering, the designers at BMW decided to locate the cupholders on the F22 BMW slightly recessed under the dashboard. As a result, I must listen to my wife complain every time she gets a Big Gulp. Fortunately I…
Creality K1 / K1 Max – Fan Seal Plate (MCU Cooling Improvement) On the original Creality K1 and K1 Max , the stock 6015 MCU cooling fan is mounted on four posts beneath the printer’s bottom plate. This leaves the fan sitting approximately…
To prevent this damage (see last picture), I increased the control arm's support surface (from 10 mm to 20 mm). Installed on a Windlass LEWMAR Pro Series 1000 Material: PETG (this prototype; next 3D print with ASA) Layer height: 0.2 mm…
I would recommend printing this with your extrusion multiplier bumped down one or two percentage points.
Now you can sort the screws directly into practical bins! Use my d3 bins (d2 wave can be used for 40 & 35 mm slots) to keep them separated. I found that the upstream handle caused binding, so I recommend using the “contour grip” instead…
This is a handle attachment for a Pelicase 1610 handle. It makes carrying the heavy pelicase way more comfy. Printed in TPU. After attaching it to the handle I inserted three little screws into the holes in the original handle.
The original sunroof lock on the Microlino has some play. This causes wind noise when driving. The parts shown here are clamped into the existing locking wedge, resulting in a play-free closure.The original sunroof lock on the Microlino…
I have now made over 30 extruders and am sharing my experience. It lets to fix two problems: bad clamping and overheating. Suitable for printers: k1 series This version uses: 2 pins instead of 3 a through hole has been added for better…
This is the motto of the Goldenholz Epilepsy + Data Science Lab, but it is so cool all by itself, I thought I would share it with others who might be inspired by it. It means we NEVER stop trying to do better. To print this, I used PLA in…
Just wanted to have an Tim Taylor bust. Because I can't sculp I commisioned the sculpting, but it came out great!
While printing and assembling the Modular Picture Frame (https://www.printables.com/model/147224-modular-picture-frame-kit), I needed a few extra parts. Frame attachment - An attachment at the back to hold the sides of the frame together.…
I am working towards a print-in-place version of Tomáš Koloušek's magnetic coupler design. I have not looked at the wheel or wheel holders. The design files attached to this model allow for printing two parts that are connected using one…
Description I use some of the KOZIOL [pi:p] bird feeder for years in the garden. They have a great design and space for several days' worth of birdseed. But… If the feeder is hung in an open, uncovered spot—which makes sense to protect it…
This 3D model is an improved version of a standard IKEA desk lamp. I designed and added a wedge-shaped base to prevent the lamp from sliding on the desk. The wedge increases stability and improves safety during everyday use. The model is…
This project contains 5 improvements for a 1610 CNC. These improvements were inspired by the following YouTube videos of JJ Hontebeyrie: https://www.youtube.com/watch?v=NNrqx62lyBI&t;=602s https://www.youtube.com/watch?v=_gX_YCsN4wo 1.…
This is a simple remix of @Cosmas https://www.thingiverse.com/Cosmas dustcollector optimization to work with the Makita clones like the Katsu. Katsu's spindle-fixation tends to be a tad bigger and though is touching the original design…
ChuckG's mod works brilliantly. It prevents the screws and springs from popping out, but it still allows easy adjustment and release of the screws. Unfortunately the STL has the decorative squares at 0.4mm deep instead of 0.2mm like the…
This version of the top plate increases the space to pass swatches in the top plate and moves the position of the top open yarn hole. The old position caused the yarn to get hooked onto the wheel screws if the tension was a little lower.…
IMPORTANT NOTE THIS IS FOR THE 25mm VERSION !!! MOLT IMPORTANT ÉS PER LA VERSIÓ DE 25mm !!! I've added the Fusion 360 file, very heavy to work on PC though. Basically, this is a remix of a LR2 CNC part from Ryan's super cool CNC design to…
After my son got a rock tumbler for Christmas, our interest was sparked enough to end up purchasing the Harbor Freight rock tumbler (Central Machinery). This rock tumbler has many flaws but with some 3d printing and a little know how,…
Modified the hood so the front lights face forward and added 2 more, really like how the LEDs look when they face forward and they also provide more light, same 5mm LEDs and 5mm LED holders can be used. they fit rather snug but depending…
.4 nozzle. .2 layer height. Default print settings. There were a couple remixes of the top that fixed problems so I combined them and added my own fix. @zktec_3322325 fixed the entire top for better stacking but changed the top to a…
It's no secret Nerf's Torrent has some issues. For the past year or so, I've been taking it to games so I can find and fix all of them. There was one persistent issue that had me stumped for months: the Torrent would be shooting fine,…
I bought a fanatec universal hub V2 and was not happy with the shifter panels. Their arrangement regarding to the wheel (I have quite a large one with some distance to the hub) felt off. So I made new shifter panels and included counter…
This remix addresses several problems that I experienced: When filament is stored in the box and the box is rotated during handling the filament tip occasionally gets yanked from the plug. The solution is to split ends of the plug and add…
Quick remix of a case for the GX590 / GX591 spot welder with a range of small dimensional tweaks and a few additions. Most notably, there's a mounting point for a 25mm fan right above the MOSFETs. This is optional - there's also a file…
Just put the pieces together and put the ants inside. Enjoy your new ant nest.
Introduction I love this design. It's great, but I had some issues I needed to address. Thank you to GunplaMark for making my life easy by publishing the STEP files. I've made a number of changes from the original design: The original…
Prints without support. You may need to rescale it by 0.5% + or - to really fit, so print one and test it. PLA and PETG working fine printed in 0.15mm
This is an excellent improvement to cable management by pekcitron Go to his webpage for description and pictures https://www.thingiverse.com/thing:4065410 Print instructions Printer: Prusa Model: Mk3S Rafts: No Supports: No Resolution:…
Home Improvement - Tim and Al - 1991 3D printable model. Super easy to print, just size to your needs and go!
assembly guide and hardware kit Included iron sights are held on with friction, adjust scale% in slicer if fit is too tight/loose https://blasterhub.com/2025/12/acorn-armaments-signet-build-assembly-guide/…
I created these accessories to make using my Watersnake ASP 18lb trolling motor a bit easier on the water, and address some issues I found installing on my Pelican kayak. The motor and mount are a great value, and instead of using PVC…
We have mouses and two carousels. I was really pissed of the noises from the carousels. It has to be lubricated every few days. Additional things Bearings 608 Screews Drill for making holes for screws and to enlarge original hole. Print…
Must be printed in PETG as a base minimum ABS/ASA or Nylon Carbon preferable Be careful when installing the cables/fans in order not to short the board There is no need running these at 100% (Only 20% is enough for the most job)
This design optimization is for people who has cooling efficiency problem with his S1 and you don't want to add any weight to this super heavy Sprite thing. Since I found that the S1 has more stringing than the V2 has. I made some…
Designed this to be able to use the water taps without touching them with the hands. With the big lever, they can be used with the elbow or the back of the hands. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
What started as a simple slap-dash approach to adapt GunPLAMark's great design to the containers I already had on hand or could get access to in Australia (linked below) quickly spiraled out of control into a whole swathe of improvements…
I reverse-engineered the model from the original STL and adjusted several dimensions for a more secure fit. The magnet hole is now snug enough to hold the magnet firmly while still allowing it to be pressed in by hand. I also widened and…
This little gadget snaps right into the CraftBot (original or plus) fan module. Its purpose is to optimize the air flow at the cold zone of the extruder. It prints without supports in minutes and it is very easy to snap right into the fan…
This is a remix of the main picker part where an unwanted gap is removed / corrected and also some useful rounding corners added. One of these eliminates the need of supports there. I was printing this interesting design and discovered a…
This is a remix of Hooptey's VAWT which can be found here: https://www.thingiverse.com/thing:85168 LowerMotorMount07 makes it easier to use various size motors and it has a pass-through for wiring. MagneticBase08 holds three small…
So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…
![Koziol [pi:p] Bird Feeder improvements](https://media.printables.com/media/prints/d1705743-fa2b-49c8-84eb-7924bd722697/images/11292321_41d79c4d-828d-4554-a79f-d435944df423_9d561b4e-5aad-4921-90ba-cd6b5ab06230/img_8750.jpg)
