Tools stand Improvement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improvement to a Cina tools stand by 3D print
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I bought from a Cinese online store a tools stand for my desktop, but I realize when using that always my tools doesn't fit as I like in that kind of stand. I design few 3D print accessories to improve the capability to keep the tools in order.
Tips: Try to play with contour compensation in your slicer to find the perfect size for fitting. In my case I set +0.11mm for outside contour. It depends from the calibration of your printer.
Trick: In case you print with too much play the tubes and you want to improve the stability, use a couple of O-ring to keep the tube in place (see my picture below)
Parts List:
n.15 X Tube n.1 - (outside diameter 13.5mm; Inside diameter 12.5mm; lenght 107.5mm)
n.1 X Tube n.2 - (internal diameter 19.8mm; inside diameter 18.8mm; lenght 59.5mm)
n.2 X Small box - (large 34.9mm; withd 9.9mm; lenght 56mm)
You can print any material you like,
In my case I Printed in Yellow Esun ABS on Bambu Lab X1C
Printing informations:
I printed Yellow Esun ABS on Bambu Lab X1C, 0.2 Layer, 261°C; 3 Walls: No Infill; No support; No Others; 6 bottom layer; 6 Top Layer; Fan 0%; Standard speed
Enjoy printing :-)