Tools stand Improvement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improvement to a Cina tools stand by 3D print
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 42
- Makes
- 0
- Views
- 739
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I bought from a Cinese online store a tools stand for my desktop, but I realize when using that always my tools doesn't fit as I like in that kind of stand. I design few 3D print accessories to improve the capability to keep the tools in order.
Tips: Try to play with contour compensation in your slicer to find the perfect size for fitting. In my case I set +0.11mm for outside contour. It depends from the calibration of your printer.
Trick: In case you print with too much play the tubes and you want to improve the stability, use a couple of O-ring to keep the tube in place (see my picture below)
Parts List:
n.15 X Tube n.1 - (outside diameter 13.5mm; Inside diameter 12.5mm; lenght 107.5mm)
n.1 X Tube n.2 - (internal diameter 19.8mm; inside diameter 18.8mm; lenght 59.5mm)
n.2 X Small box - (large 34.9mm; withd 9.9mm; lenght 56mm)
You can print any material you like,
In my case I Printed in Yellow Esun ABS on Bambu Lab X1C
Printing informations:
I printed Yellow Esun ABS on Bambu Lab X1C, 0.2 Layer, 261°C; 3 Walls: No Infill; No support; No Others; 6 bottom layer; 6 Top Layer; Fan 0%; Standard speed
Enjoy printing :-)