1 / 1
MMU2 Tension Screw Keeper with minor cosmetic improvement — zdjęcie 1

MMU2 Tension Screw Keeper with minor cosmetic improvement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a fix for the decorative squares which are hard to get looking nice on the original mod.

Ocena
5 / 5
Polubienia
4
Pobrania
36
Wydruki
1
Wyświetlenia
275
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

ChuckG's mod works brilliantly. 

It prevents the screws and springs from popping out, but it still allows easy adjustment and release of the screws.

Unfortunately the STL has the decorative squares at 0.4mm deep instead of 0.2mm like the original PRUSA model. Combined with thin bridging this results in a less attractive print, especially with PETG.

 I have added a modifier to the 3MF file that restores the indent to 0.2mm. I have also set Thick Bridges in the settings. This produces a nicer finish on this model.

Tagi