Counting matching models…
I've created a rinser that can be applied on every PET bottle with DIN 6063-1 thread (widley used in europe and may be other countries). How to print? The model can be printed in place, without any need for support or rims. A smooth print…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
Print in two colors to make the text show, use four M3 screws to hold the lid in place
I made a little case for my XY-3606 DC Converter, the bottom is 2mm thick but in 3 places where solder joints are the largest, i have an extra 1mm of clearance to allow the board to sit flat in the box. You can secure with M3 screws…
UPDATE JULY 31.2019: After twice breaking the PLA printed tool holder clamp, I have switched to a clamp printed with PETG filament and a high infill. YMMV. This Angle Grinder Chop Saw for Harbor Freight Item 60625 is a remix of the Angle…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Mounting plate for the common XY-3606 5V Voltage Regulator which is otherwise missing mounting holes. Print Settings Printer: Crealty Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Filament: Extrudr PLA blue Category:…
This model is compatible with the lego system.
This model is compatible with the lego system.
I needed an under desk mount for my surge power strip and designed the clip to fit along the grooves with tension. The clips have holes for using small wood screws or you can use double-sided thin tape as needed for your own mounting…
I wanted to use a 60mm fan I had laying around in my growtent so I designed this tube clamp and fan mount. It's printable in two parts and uses M4 bolts and nuts to connect the parts together and attach the fan. The tube clamp attaches to…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Basic mudflap design shaped to not interfere with the chassis much. A lot of the designs currently are for older arms. Fits my Granite 223S V4 and going by the site a few others that use the ARA-1606 rear arms: Gorgon Fury Senton Vorteks
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
A simple fan cover to stop fingers going into fans, made for a Sunon MF60251VX-1000U-A99. M6 Bolt used for mounting (tap the fan mount holes)
This adapter was created specifically for Voron Trident and Voron 2.4 kits that have the long cutout in the top part of the back panel. It is secured to the filter box with 4 M3 Screws (heat sets would be installed into the 4 holes in the…
This is a very simple cap for the Leifheit 85606 Washing Line Ground Socket (Bodendübel Abdeckung) that I created after the original part was lost. I designed it by using FreeCAD and attached the file, too. So feel free to improve this…
Mount for DC 9V 12V 24V to DC 5V 5A Buck Converter
This 606 Mini Bearing (17 x 6 x 6 mm) is entirely printed, easy to assemble and customizable. It is robust, tight, and runs very well. The parts can be printed on any regular 3D printer with a 0.4 mm nozzle. Advantages This assembled…
End cap for Misumi 6060 extrusion Fits on both the normal HFS version as the Economy version NFS Category: Parts
This model is compatible with the lego system.
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
Na přání kamaráda jsem vytvořil několik dílů ze systému pořadače pro šuplík ve starší kuchyni Ikea Rationell. V průběhu let se z původních ulomily ty půlkulaté háčky, na kterých to celé drží. Díly jsou dva. Držák (číslo dílu 14606) ve…
A cover for a Mean Well MWP-606 power supply which I use for my minigun supergun to run a Neo Geo MVS board. The mini-Fit Jr. power connector I used isn't perfect. I hat them laying around and removed the 90° angle to fit them in. The 5V…
This model is compatible with the lego system.
These are hooks to hang things into the E-track of the 606 shelving system designed by Dieter Rams in the early 1960s and made to this day by Vitsoe. The design is parametric for use in OpenSCAD with its built-in customizer tab. You can…
Fits Vitsoe 606 shelves (16cm & 22cm). Routes LED strip power cables from the 606 shelf's edge to the wall, and hides the cables. Support pieces Two versions of the U-rail support pieces are provided - depending on if there's a wall…
Mower deck roller for fabricated deck Image is the roller it replaces.
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
Spool holder with 606 bearing. As I had a few left. Basically the same system as many other designs. But with a little more character :) I added some M3 bolts for more solidity, and there will be two m3 rods (I dont have them for now, so…
3D printed wall mount designed for my Home Assistant dashboard setup , which runs on an old Lenovo tablet (Lenovo TB-X304F) using the Fully Kiosk Browser app. The mount allows you to easily place your tablet on the wall and use it as a…
I AM NOT AN ELECTRONICS EXPERT. USE AT YOUR OWN RISK This is a cover I made for my Mean Well MWP-606 power supply. I was inspired by other BETTER covers. I chose to do this so that I could use one of the common to find on Amazon IEC…
Bracket to mount high-current binding posts in HP/Agilent/Keysight 65xxA/66xxA/606xB/etc. power supplies and electronic loads. It is designed to fit Cal Test CT4231-NI-0 / CT4231-NI-2 binding posts. To make clearance for one of the…
Сompact сase for DPS module 5005 or 3606 includes AC-DC power supply, DPS modul and 3 types of output interface XT-60, DC 5.5-2.5, DC-jack. Model containing maine body and cover For assy need: Screw M3*6 x4 Insert's M3 x4 DC 5.5-2.5…
Smooth Spool Holder (606 Bearing, Fully Printable, No Supports) This spool holder was originally designed to hold yarn rolls for my wife. By the time I finished it, however, most of the yarn was already gone — she’s completely addicted to…
I'd planned to hang with either knotted or a loop of 8mm rope, but switched to multiboard rails. If you wanna try the rope thing maybe glue the 2 parts together so they don't slide apart. Printed in Siddament PETG as he does tool coloured…
Should be the exact same height and outer bezzle thickness as the Govee Tri LED Panels. (Idea from https://www.printables.com/model/657277-govee-hex-panels-parametric) Created them to glue some moss into them and make it look pretty on…
I wanted to print a storage option for my printer nozzles. I found this one for and Ender 3 Pro (not my machine) https://www.printables.com/model/139926-nozzle-drawer-storage-drawers-02-04-06-08-10mm So after printing I decided to make a…
I don't like the original design of the Trust AMST-606 window sensor, in addition it was to "fat". This is a much thiner and modern design. Sensor housing: The Battery holder (CR2032) is in the cover. It is required, to connect the…
This plate is meant to be 1/2" steel. I printed it to mock it up to the transmission. It mounts from the tail stock to a Energy Suspension 3.1108R.
Mount your mini tape measure on your skadis board no supports Check out my fully modular Skadis system:
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Smooth Spool Holder (606 Bearing, Fully Printable, No Supports) This spool holder was originally designed to hold yarn rolls for my wife. By the time I finished it, however, most of the yarn was already gone — she’s completely addicted to…
Mount your mini tape measure on your skadis board no supports Check out my fully modular Skadis system:
This 606 Mini Bearing (17 x 6 x 6 mm) is entirely printed, easy to assemble and customizable. It is robust, tight, and runs very well. The parts can be printed on any regular 3D printer with a 0.4 mm nozzle. Advantages This assembled…
A simple container for eleven 606 bearings with a threaded cup. Print settings Layer height: 02.mm Nozzle: 0.4mm Infil: not applicable Supports: no Brim: no
Remix of the Filler using 606 bearings because that's what I had to hand.
This is an easy print. Less than 4 hours total on a Neptune 4. It fits snug and will not fall off. I printed this in PLA, but PETG works too. 95A TPU will not work. It is too flimsy and does not get a grip. I printed the big one with 12…
This is a simple jig for 12mm LEDs spaced 3" apart on a 2" x 2" x 1/16" Aluminum Angle 6063. The drill hole is 13mm and the catch numb is 11mm. This should give you enough room to drill without coring the plastic. The nub is a bit smaller…
Spare part for ikea Vejmon Sofford with article number 128606. it is probably compatible with several of ikeas furniture. works great in PLA
Just another 5-minute job of a case fitting the XY3606B DCDC buck-boost-converter. Was not keen on having the PCB exposed. I soldered XT60-connectors to the base of the board, so they're accessible on this one as well. Barrel DC-jack…
This model is compatible with the lego system.
Used to plug the “Option” syrup line for a Taylor C606 (McDonald's) Milkshake / Sundae machine; requires an O-ring for the very top channel.
This model is compatible with the lego system.
wltoys hk110s frame direct drive for 1606 motor printed PETG-CF PP-CF Tail motor Goosky s1
I needed a bearing and didn't want to wait for my friendly neighborhood prime guy to hand deliver it. Also out of shear curiosity if i could make one that worked and didn't fall apart as soon as i took it of the printer. I had a video of…
This 606 Mini Bearing (17 x 6 x 6 mm) is entirely printed, easy to assemble and customizable. It is robust, tight, and runs very well. The parts can be printed on any regular 3D printer with a 0.4 mm nozzle. Advantages This assembled…
A simple container for eleven 606 bearings with a threaded cup. Print settings Layer height: 02.mm Nozzle: 0.4mm Infil: not applicable Supports: no Brim: no
Náhradní okoružek na Toro Zdobička dortu injekce, plast, 8 nástavců, 150 ml 260681. Pro lepší přesnost doporuči tisk změnšin na 99% (záleží na použitém filamentu)
ORGANIZZATORE GT606 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
A clean rebuild of the original 608 bearing for a 606zz (what I had at hand) Be nice, it's my first f3d project, I normally use openscad :D Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 200…
Printed in PLA with .08mm layer height spiral vase mode. The spherical face is on the baseplate with brim enabled.
Modular mounting design for a BigtreetechSKR pro V1.2 on RatRig V-core3. Duct for driver cooling to mount a 6060 fan ( mounting holes THD is 70.71mm, or verify from centre to centre 50mm ). There are 2 different “fan covers” wich You can…
I have found the original design of this spool holder very useful and convenient, however I didn't had any 608zz bearing at hand at the moment, so I decided to create a small piece to adapt 606zz bearings to the original design of T B A…
Print with the model oriented vertically, and scale to the desired height in the slicer. Brim or raft may be required in order to prevent movement and detachment during printing. For best results use a printer that supports Pressure…
You need to print the bottom part twice. One part needs to be mirrored in the Y-axis in the slicer. The top needs to be printed flat. You need 4 M3 bolts Included is the f3d file I used a 0.2mm layer height with a 0.4mm nozzle. I printed…
You need a M3 bolt + M3 threaded insert (OD 5mm, length 3mm…8mm). After printing, melt the threaded insert into the piece. Print “upright” for best quality (I found other orientations made the nut not fit exactly). No supports needed.…
This model is compatible with the lego system.
