6060 fan to 100mm (4") round duct adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created this to adapt from a 4" round duct to a 60x60 fan (50x50 hole pattern) Hook up a Voron to a carbon filter
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 76
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This adapter was created specifically for Voron Trident and Voron 2.4 kits that have the long cutout in the top part of the back panel. It is secured to the filter box with 4 M3 Screws (heat sets would be installed into the 4 holes in the filter box).
The 4 holes on the filter box would normally be for a 60x60 fan (holes spaced at 50mmx50mm).
It is a loose fit to the 4" duct/hose that would attach to the adapter, the gap can be closed with a clamp or with the use of some ducting tape (I like the sticky aluminum tape for sealing up seams in HVAC systems).
Updated Feb 7th, 2023 - Added the hose ring that fits onto the duct and allows for easy removal and attachment of hose.
- you'll need some M3 heat sets and a couple of longish M3 screws (I tighten and loosen the screws only when I need to remove the hose so that I can service the printer more easily) - take a look at the pics to get an idea.
Feel free to post makes and share photos. Always looking for feedback on items that I have designed.