10kg or 5kg Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decided to make a spool holder for those of us out there who find themselves with large spools!
- Rating
- 4.5 / 5
- Likes
- 30
- Downloads
- 86
- Makes
- 2
- Views
- 1,002
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I built for the community a 5kg or 10kg spool holder. This should be a fairly easy print and is designed with easy to modify files and easy to replace inserts to make printing easier and maintenance easier.
If you redesign this model attribute me!
BOM:
Material: PLA Pro, ABS, ASA (keep in mind friction will likely melt lower temp filaments.)
EMT: 1x 1/4in (18mm OD) x 300mm
M5: 4x 20mm screw and nuts (for bearing assembly)
M6: 4x 18mm screw and t-nut (for mounting 30x30 extrusion, likely could make M5 work)
Bearing: 4x 608 bearings
T-Slot Extrusion: 2x 30mm X 30mm X 228mm OR 1x 20mm X 20mm X 228mm (double check the obj files!)