1 / 2
Titex Calibrated Powerlifting Barbell and Plates 0.25kg to 25kg plates with collars — image 1
1 / 2

Titex Calibrated Powerlifting Barbell and Plates 0.25kg to 25kg plates with collars

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1/5 scale replica of a Titex Calibrated Weight Plate set

Rating
0 / 5
Likes
15
Downloads
69
Makes
0
Views
381
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This is my attempt at replicating a 1/5 scale model of a Titex Calibrated Weight Plate set.  Everything can be printed, however I found that the plates were too heavy for a printed barbell.  Use a 6mm x 300mm aluminum rod in place of the actual bar.  You can get them on Amazon really cheap.  Barbell sleeves are snug enough for a press fit on the aluminum rod, although you may need to sand the rod a bit to get them on initially.  The collars come in three parts.  Make sure you print out two end caps for every collar.  Cut a piece of filament to use as the tightening handle, and glue the end caps on to the ends of the filament.  

Plate holes have a very tight tolerance to the barbell and may be difficult getting on at first, however, sliding each plate on and off a few times loosened it up to a perfect fit.  If you use an aligned Z seam on everything, you can get the collars to lock in place with a bit of a twist.  

The plates have a great feel if you use 100% infill.  I think I also went with a .15mm layer height.  No brim is needed as the plates are round.  

I've also made a 1/5 scale ER Combo Rack that is intended to go along with the plate set, but that is not included here.  You can find that model in the link below.

https://www.printables.com/model/1193394-15-scale-model-of-an-er-combo-rack-for-powerliftin


Note:  For the Collar Screw and Collar Screw End Caps I've found that I can print them just fine on my Prusa MK4S, but my friend can't get it to print at all with a 0.4 nozzle at all on his Ender.  He can however make it work with a 0.25 nozzle just fine so keep that in mind.


 

Tags