Counting matching models…
Маленький вертикальный гриф. Подобные грифы используются в армлифтинге и армрестлинге, так же может быть полезен и в других дисциплинах. Модель состоит из двух частей. Обе части печатаются без поддержек лёжа на столе. Нагрузка при…
My printing parameters: Material: PETG Infill: 15% Perimeters: 5 Brim: 10 mm Supports: None It holds my 7 kg EZ-bar with ease, but you use it at your own risk! The dimensions fit standard olympic barbells (25 mm grip, 50 mm collar), but…
This is a model that goes around a metal hook that is to be installed on the ceiling of your squat rack to hold your barbells within your rack. This print goes around a metal hook so that there is enough strength to hold the barbell but…
Adapter to use 50mm bumper plates on a 30mm barbell or dumbbell. You have to vary the scaling slightly so they fit perfectly. The innerpart is printed in PLA, the outside in TPU A95.
Why This Project? I sometimes do landmine rows with my coach, Fabien —a great exercise for building back muscles while minimizing lower back strain. Until now, we’ve been jamming one end of the barbell into a corner, wrapped in a cloth to…
A vertically mounted barbell storage for 3x3 squat racks with 1" holes. Print as oriented. No supports needed. I printed with 6 walls and 20% infill for strength. Don't print this in PLA. PLA will sag on a hot day in your garage and…
This Olympic barbell holder is a functional, print‑friendly design built to keep your bar safely off the floor and out of the way. The geometry is optimised for strength, with thick walls, generous fillets, and load‑bearing surfaces that…
I really liked MacialT's barbell collar, but I wanted tpu pads, counter-sunk holes, and hex nuts for added strength and durability. I also wanted a better latch grip for locking/unlocking the collars. I am very happy with this design, and…
This is a simple insert designed for 25 mm quick-release collars used with adjustable dumbbells and barbells. It addresses the issue where collars labeled for 25 mm bars do not clamp tightly and can slide off during use. By adding this…
It is a landmine for various excercises using your 2" olympic sized barbell. Works as a Landmine Base or a Landmine Grip Usage Just slide this landmine over the end of your barbell, and excercise. When you are done working out, use the…
A nut for a barbell set. Shaft diameter is 13mm. I was helping a friend move, and she gave me a set of weights but the barbell was missing a nut. Here is the replacement.
You can slide this over a 2" barbell and clip on a carabiner (printed or metal) for your chains, bands, etc. 1/4-20" hole included if you'd like to add a locking mechanism of some kind to stop it from sliding laterally.
Nobody likes a dirty barbell! The Barbell Butler is a set of two (2) 3D printed blocks for holding up your barbell during cleaning/oiling. There are two openings: one at 30mm for the shaft, and one at 50.5mm for the sleeves. These work…
MacialT has made a fantastic barbell collar for us to use, but I and many others found that it causes you to start your workout early, driving a bolt and cutting threads in components to don't need to be threaded. This remix minimizes the…
Instead of dropping your barbell straight onto metal and producing a loud clang noise, dampen it with TPU! I've made a sleeve to go over the barbell rack so you don't have the metal-metal interactions. It eliminates a tremendous amount of…
Simple barbell holder that straddles at 2x4 for bare walls. I offset the screw holes, used 1/4 lag screws & washers. One side should be adjusted, but it works for me. How I Designed This Measurements based on a Rogue Castro bar and a…
Print the barbell part 2 twice and use part 1 to connect the 2 pieces. Enjoy! :) Benchpress: https://www.printables.com/model/1003773-mini-gym-benchpress-my-pr-bench-press
I purchased Power Tower Workout Dip Station https://www.amazon.it/dp/B077S1G8FP?ref=ppx_yo2ov_dt_b_fed_asin_title on Amazon and then Pulley Lat Machine but the Tower tends to tip over. I then printed a weight holder so I have both a place…
You might need to adjust the Handle size (file TEST4), its older model and i might have scaled it too much, you will see.
Note: this is an accessory for the Dummy 13 figure created by soozafone, which you can get here: https://www.printables.com/model/981111-dummy-13-version-10 I designed an Olympic barbell for Dummy 13 figures, complete with functioning…
This is a 25-50mm adapter sleeve for converting standard threaded barbells or dumbbells to olympic 50mm size. total length is 190mm, thread depth is 165mm. I also made a separate 115mm spacer to cover the remaining thread on my standard…
Hello fellow gym members, now you can work out even as you eat your delicious(not so healthy) cookies. I tested this cutter with gingerbread cookies and it turned out great, remember not to make it too thin because the cookie can break in…
This is a prop barbell labeled 100. It has several fine details such as the knurling pattern on the handle and the threads to assemble the prop. As far as multicolor goes, I recommend it so that you can make the numbers stand out. Manual…
Note, This version is now obsolete. See my models page for the updated V2. https://www.printables.com/model/1219421-show-off-your-pr-with-dummy-13-olympic-barbell-set I will leave this here for people who want matching spares. I…
This model allows for 2 barbells to fit perpendicularly together. Good for things like landmine movements but allows you to adjust the height of the lever fulcrum (barbell on rack) for difficulties and movement styles.
A barbell clamp for a 2" Olympic bar with a locking mechanism to prevent it from opening. I've also added ridges inside.
Copyright (C) 2020 Peter Senna Tschudin SPDX-License-Identifier: GPL-2.0-only This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A…
Rogue Barbell Plate Christmas Ornament – Flex Your Festive Spirit! Deck the halls with gains this holiday season! This 3D-printed barbell plate ornament is the perfect way to pump up your tree with some serious gym vibes. Whether you’re a…
Easy-to-print rack for small neoprene barbell plates (up to 5 kg). Shaped to make the plates self-center.
Trophy of barbell with and without sign. Its recommended to print sign separately and glue it afterwards. Trofej s činkou s nápisem a bez nápisu. Je doporučeno nápis tisknout zvlášť a požději jej dolepit.
Маленький вертикальный гриф. Подобные грифы используются в армлифтинге и армрестлинге, так же может быть полезен и в других дисциплинах. Модель состоит из двух частей. Обе части печатаются без поддержек лёжа на столе. Нагрузка при…
I originally made this to hang a baby scale, but it suddenly hit me: this model may be useful for others. The cylinder for the barbell is slightly larger than 5 cm in diameter. To avoid supports and ensure robustness against tension…
A toddler barbell about 5.5 inches (14cm) long. Printed low infill with tree supports.
Yo, bro! Your desk is looking weak, but not for long! Say hello to the Mini Barbell Desktop 3000 , the ultimate desktop accessory for alpha vibes and serious desk gains. This beast may be small, but it’s got big energy. Perfect for…
A quick-release bar clamp for a 2-inch barbell. There is a TPU center section (the one with the lip) and a non-TPU one to allow for replaceable rubber pieces, or make it possible to work with out having TPU filament (the flush one).
SAFETY DISCLAIMER: please make sure you're screwing the barbell mount onto something sturdy. I take absolytely no responsibility on any damage or injury that may arise from the use of this model. I printed mine in CF-ABS and they're still…
This is my attempt at replicating a 1/5 scale model of a Titex Calibrated Weight Plate set. Everything can be printed, however I found that the plates were too heavy for a printed barbell. Use a 6mm x 300mm aluminum rod in place of the…
Barbell Collars attach firmly and securely to any bar with a sleeve diameter ranging from 47.5mm - 50.9mm. The collars are compatible with Olympic bars and powerlifting bars as well as most logs, cambered bars, Swiss bars, and safety…
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Because the original handle was made of Rubber, which was able to stretch over the diameter without a thread, and I printed it from PETG, there is a thread on only one side. Supports were only needed under the thread. The inner diameter…
This lets you hang a barbell vertically on a horizontal wall corner as shown in the photos.
For 45lb power lifting/Olympic bars , or bars with 28mm+ shafts, use “Barbell rack holder - normal 29mm bar” For 15lb smaller/curl bars , use “Barbell rack holder - small curl bar.” The other mount will fit fine for these, but this one is…
Replaces the end caps on a squat rack with 60mm box section, to hold a barbell. The two pieces are assembled with 2 x M5 20mm bolts into square nuts which are to be embedded in the print (remember to pause the print at the correct layer…
After seeing 2" quick clamps and not seeing one for 1" barbells and getting some inspiration from online models, I give you the 1" barbell clamp with a TPU option and a basic spacer that can have any material adhered to it for grip. For…
Fixes a problem I had with the clamps not being very snug on the barbell.
Since I didn't want to pay 60 EUR for 2 aluminium hooks, I designed them myself. I wasn't satisfied with the ones offered, how they looked and that you would need to remove a little bit of material, so why not do it yourself? I printed…
Mini lego scale barbell and plates. may need to be printed at around 80% scale due to tolerances be careful because its a little breakable
Spacer for 28mm barbell to give me bit more room for comfortable benchpress (its no fun hitting the sides of the rack with plates all the time). 5 cm length, 4 cm outer diameter, 28mm inner diameter ( fit decathlon barbells ) I printed…
print handle once and weight twice. The weight without filling is about 65g, filled for example with sand about 300g - 330g.
A barbell keychain printed in parts so no need for a multicolour system. The weights slot on to the bar and there is a clip to keep them securely in place. All parts print without supports. Perfect as a gift for anybody into weight…
Barbell Coasters – Strength Meets Style Add some muscle to your coffee table with these barbell-inspired coasters. Designed to mimic classic weight plates, these coasters are perfect for lifters, gym rats, or anyone who loves fitness…
My printing parameters: Material: PETG Infill: 15% Perimeters: 5 Brim: 10 mm Supports: None It holds my 7 kg EZ-bar with ease, but you use it at your own risk! The dimensions fit standard olympic barbells (25 mm grip, 50 mm collar), but…
Two different versions uploaded depending on your grip strength. The short handle can hold several hundred pounds per clip, but can be difficult to load on the bar. Both work great for bench, deadlift, and squats on a 2" standard bar.…
I printed in PLA with four walls & five layers, top, & four layers bottom. Orient upright with the C-clamp facing the bed (as displayed) and which ensures the clamp can flex slightly as it is seated in place.
I printed in PLA with four walls & five layers, top, & four layers bottom. Orient front down with C-clamp facing up which ensures the clamp can flex slightly as it is seated in place.
I have one of those classic 1" home barbells that's about 5' long and uses a silver knurled sleeve stuck between two red screw-down collars. I found that the plates were spaced too close together to do Sumo Deadlifts. These are simple…
Its design allows for precise adjustment without the need for tools, making it easy to change weights during your workout at home or at the gym. Simply slide the clamp onto the bar, push it until it is tight against the disc and secure it…
Lock your gains with precision and style! This 3D-printable Dumbbell Collars / Barbell Clamps Kit is designed to keep your weights secure and your workouts smooth. 3 different sizes: IN_DIA 31 mm × L 50 mm – ideal for standard dumbbell…
This holds barrel on the wall. Lock has a small paddle which locks itself, so it won't fell off easily. It's needed to cut a thin wall connecting locking pin with locker so the locking pin can move easily. Enjoy.
A wall mounted bracket for storing dumbbells and barbells. Speciffically shaped for Decathlon 28mm bars. For dumbbells you only need the ‘upper’ bracket, for barbells you might want to also print the ‘lower’ bracket to prevent it swinging…
MGN12 carriages for SeeMeCNC's barbells. For each carriage you will need 4 McMaster M3 Heatserts https://www.mcmaster.com/94180a331 4 M3x16 Screws (Mount to MGN12H car) 2 M3x20 Screws (Barbell) 2 M3x12 Screws (Belt Retainers) 1 M3x12…
I printed in 0.24mm ASA with 15% gyroid infill. Let me know if you are interested in another size!
***UPDATE*** I've had a few requests to add some additional accessory hooks to the model so here it is. The new profile reflects the changes… enjoy! ***ORIGINAL POST***At some point I realized all the cardio in the world can't help if I…
I get frustrated adding and removing plates for deadlifting. Place this little ramp against your plates and roll the bar and plates up on each side. It lifts the bar enough to allow easy plate changes. Simple and easy where you are…
Uses this level https://www.amazon.com/dp/B0DR64D52Z?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4 Simply print this and then glue in that level. Snaps on and off the bar.
They are designed to keep your weight plates on spot so they don´t slide. To fix it in place you only need a M5 screw and nut. I also designed a bigger version for a Men's bar. Link:…
This is a model that goes around a metal hook that is to be installed on the ceiling of your squat rack to hold your barbells within your rack. This print goes around a metal hook so that there is enough strength to hold the barbell but…
Obviously you can change weight by bottle size, infill material and the amount of infill. Can be printed without Support
A Light switch cover in the shape of a 45 pound barbell plate.
Adapter to use 50mm bumper plates on a 30mm barbell or dumbbell. You have to vary the scaling slightly so they fit perfectly. The innerpart is printed in PLA, the outside in TPU A95.
Ergonomic grip that slides onto the handle of the American Barbell V-bar tricep attachment.
Why This Project? I sometimes do landmine rows with my coach, Fabien —a great exercise for building back muscles while minimizing lower back strain. Until now, we’ve been jamming one end of the barbell into a corner, wrapped in a cloth to…
A horizontally mounted barbell storage for 3x3 squat racks with 1" holes. Print as oriented. No supports needed. I printed with 4 walls and 20% infill for strength.
A vertically mounted barbell storage for 3x3 squat racks with 1" holes. Print as oriented. No supports needed. I printed with 6 walls and 20% infill for strength. Don't print this in PLA. PLA will sag on a hot day in your garage and…
When I found out about Trick Laser's nifty ball-cup Kossel arms with plastic barbells to guarantee arm spacing and reduce joint lash (see http://www.tricklaser.com/ ), I was immediately intrigued, but I needed an effector to use them with…
When I found out about Trick Laser's nifty ball-cup Kossel arms with plastic barbells to guarantee arm spacing and reduce joint lash (see http://www.tricklaser.com/ ), I was immediately intrigued, but I couldn't find any designs anywhere…
This Olympic barbell holder is a functional, print‑friendly design built to keep your bar safely off the floor and out of the way. The geometry is optimised for strength, with thick walls, generous fillets, and load‑bearing surfaces that…
I really liked MacialT's barbell collar, but I wanted tpu pads, counter-sunk holes, and hex nuts for added strength and durability. I also wanted a better latch grip for locking/unlocking the collars. I am very happy with this design, and…
This is a simple insert designed for 25 mm quick-release collars used with adjustable dumbbells and barbells. It addresses the issue where collars labeled for 25 mm bars do not clamp tightly and can slide off during use. By adding this…
It is a landmine for various excercises using your 2" olympic sized barbell. Works as a Landmine Base or a Landmine Grip Usage Just slide this landmine over the end of your barbell, and excercise. When you are done working out, use the…
Fits any 30 mm rod. I tested it with a 5 kg weight plate in a vertical position, and it held perfectly, but for safety reasons, I use a screw fastener when using it in this position. Part Size Qty Source M3 bolt M3x30 SHCS 2 Link M3 bolt…
I was missing some from some used weights that I got and threw this together. I printed in TPU. It's a tight fit. Lining it up and using the weights themselves to press into place is the way to go. There are 2 files. One fits into the…
A nut for a barbell set. Shaft diameter is 13mm. I was helping a friend move, and she gave me a set of weights but the barbell was missing a nut. Here is the replacement.
You can slide this over a 2" barbell and clip on a carabiner (printed or metal) for your chains, bands, etc. 1/4-20" hole included if you'd like to add a locking mechanism of some kind to stop it from sliding laterally.
A nut for a barbell set. Shaft diameter is 13mm. I was helping a friend move, and she gave me a set of weights but the barbell was missing a nut. Here is the replacement.
I designed and printed this barbell for a friend of mine. The measurements are designed to fit real 50 mm plates and locks. Printed with 6 walls and 25% infill, so they can take some punishment. BOM: 1 piece: 21 mm wooden rod 2 pieces:…
Nobody likes a dirty barbell! The Barbell Butler is a set of two (2) 3D printed blocks for holding up your barbell during cleaning/oiling. There are two openings: one at 30mm for the shaft, and one at 50.5mm for the sleeves. These work…
I looked around for a wrench to tighten the plates on my dumbbells and and I only found one other maker who designed such a wrench. The problem with that design is that it only fits on the locking nut every 60 degrees. I remedied that…
So I needed a few more small plates and looked at prices or weights and couldn't believe what I saw. So I have a bag of cement and weight is a weight so I decided to make a little weight plates myself to be filled with either cement…
This is a ball-cup arm upgrade set for the Ultibots D300VS, for use with Trick Laser/SeeMeCNC fixed-width barbells and Trick Laser Ball-Cup Arms, as well as the stock Ultibots micro extruder. It should be possible to use this set with…
Yes, this is a last-exact-meter print, and here's the proof. I did use ABS-CF, but any filament will work. More guides coming soon.
NEW VERSION AVAILABLE https://www.printables.com/model/215501-simple-barbell-collar-v2-50mm-and-28mm This is the simplest barbell collar you'll find on the internet. I hate complex designs so I made my own collars to prevent using…
![[998 mm] Mini Barbell Keychain Decor](https://media.printables.com/media/prints/7a17b5d6-26ab-499d-9fe9-88d3729cd57a/images/13308903_6ed554cf-1590-4a71-a3ac-2af571429727_a77e6c81-876a-48d4-b053-50c681597217/20260709_001955.jpg)
