Barbell nut & bolt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found that my old Wieder wieght set had broken nuts/bolts that hold the wieghts on the bars. This is a replacement.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 91
- Makes
- 3
- Views
- 468
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I found that my old Wieder wieght set had broken nuts/bolts that hold the wieghts on the bars. This is a replacement.
Print Settings
Printer:
DaVinci 1.0 / Repetier
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
bolt: 100% nut:30%
Notes:
You can print without supports but it looks better with them.
The nut part should be at least 20% infill with 3 outer layers, 7 top/bottom layers, while the bolt should be solid. I printed one in PETG which is the strongest but I also used ABS. If the bolt isn't solid it will snap with any sideways force. 100% infill for the bolt.
ABS doesn't supply much friction on the steel bar but it does hold. If it doesn't you could use a bit of tape on the bar and then slip the bolt on the bar and tighten it down.
Category: Replacement Parts