Search results: weights

Counting matching models…

Printables

Small + Chunky S-hook for CSM Weights

Fantastic hook modelled by Tmpx64 ! Print Solid, 100% infill in PETG - Scaled in height and thickness to work with my heel forks and heel weights. 1cm thick, 2inch x 1inch. Please download the original model as well!

Order a print of this model

Printables

Storage Box for Calibration Weights (Dexcom G7 Magnets)

To hold the lid shut, i used the tiny magnets from Dexcom G7 Sensor applicators but you can also get a bunch of 5 x 1.5 mm magnets on AliExpress. For the hinge bolts i used the threaded ends of 2 mm bicycle spokes. I mounted them by…

Order a print of this model

Printables

Coin Tube Weights - USD Coinage Set

Series of Tubes for USD Coinage to serve as storage and generic weights for maker projects.

Order a print of this model

Printables

Sewing Weights Skadis Holder

It holds up to 7 of my short sewing weights. For the fitting Sewing Weights go here: Use tree supports to print, and use 4-5 walls to get a good stability. It is also easy to take out of the skadis board, so you can take it with you if…

Order a print of this model

Printables

Scuba weights (models for casting)

The bigger one is 1 kg,and the smaller one is 0.5kg. I put two small (2.9mm)holes in the bottom of each model so when you need to take is out on the casting sand/clay you can screw in two m3 screws or some woodscrews for puling “handles”.…

Order a print of this model

Printables

Auto-rewind spool holder - Grips & Arm for wheel weights

Arm for wheel weights added. Screw grip added Glue grip added

Order a print of this model

Printables

Mizu's weights - parametric model

I printed it with PLA with 0.28 layer height. Then I sanded it for a smooth surface, so I could cast it later on with resin. I used 6 pieces for one weights set. I designed it to my proportions - I'm 179 cm tall, and for me 16 & 24 cm…

Order a print of this model

Printables

mid-century modern lamp Base with additional weights

Since 3D prints have little weight, it can happen that the weight of the electric cable makes the lamp slip. I cut the tip of the legs so that they are flat and added "inserts" to insert weights. The weights are iron bars to balance the…

Order a print of this model

Printables

Curtain Cord Weights

Two identical parts that clip together.

Order a print of this model

Printables

Weights holder

Holder for one arm weight to screw into the wall. WARNING: Make sure to use at least 6 walls with a 0.4mm nozzle or 4 walls with a 0.6mm nozzle so that the holder is strong enough. To print without support. Compatible with weights with a…

Order a print of this model

Printables

Redesigned base with weights and fan mount with holes

Order a print of this model

Printables

YK4106 - front wheel weights bracket

YK4106 has a strong rear weight biais in Pro version. This aims at using the room asside the front servo to glue some wheel weights. An update is planed once I'll receive the official optional front weight. Category: R/C Vehicles

Order a print of this model

Printables

Stacking Tray Sewing Pattern Weights for Pennies

Here in the US, if you need to weigh something down, pennies are the best bang for your 1/100th of a buck. Let's take advantage of this to make some beautiful, multifunctional pattern weights for cheap – it's just common cents. (Yes, I…

Order a print of this model

Printables

Vertical Business Card Holder with space for weights

Pause print just before bridging.

Order a print of this model

Printables

dumbell weights

Order a print of this model

Printables

MMU3 Buffer Solution Using Ceiling Mounted Weights

Basically the idea is to use weights (80 grams seems about right) to pull the slack out of the filament after ejecting. In order to route the tubes out of the front of the enclosure, I mounted the MMU backwards. Might prevent printing…

Order a print of this model

Printables

Custom Weights

These are small containers I designed to create a range of custom weights. I needed a bobbin tension of 23g and also made plus or minus 5g weights as well. I used a scale that had a resolution of 0.1g and added metal scrap punches until I…

Order a print of this model

Printables

Sewing Weights with Tray

My wife wanted some sewing weights to help her cut out her fabric pieces. I modeled these with washers I had laying around. They are Flat Washers, and the size for the small is 3/8 and the large is 1/2. The tray while not necessary, looks…

Order a print of this model

Printables

Stackable sewing pattern weights with inserted washers - 250g

Reworked for more weight. 7 washers option. 0,2mm layer height, 3 perimeters, 5 top and bottom layers. Pause at layer 103 to insert washers. 250g total weight. Used washers: M14, DIN 9021

Order a print of this model

Printables

Deadlift platform for miniature weights

Printed at 0.2 heigt 0.4 nozzle

Order a print of this model

Printables

Posilovací závaží se stojanem bez MMU. / Weights with stand without MMU

Zmenšená sada závodních olympijských kotoučů včetně stojanu. Reduced set of Olympic competition discs including stand. Vytvořeno z důvodu snadnějšího tisku bez MMU. Created for easier printing without an MMU. Kompatibilní se sadou činky a…

Order a print of this model

Printables

Shadow 2 AceXR extended to be filled with bullets as weights

My remix of Shadow 2 model for AceXR.

Order a print of this model

Printables

Scale Calibration Weight Holder for use with Creedmoor TRX-925 Weights

This is a simple holder I designed to hold the three calibration weights used with a Creedmoor TRX-925 scale. The holder can be made out of just about any material.

Order a print of this model

Printables

Perkis Power Heavyweights Magnet (multi-color)(8x3mm magnets)

Pictured Examples printed on a BambuLab X1C (Textured PEI) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed:…

Order a print of this model

Printables

Counterweights for Hadley, using Coins for weight

Do you have a jar of coins collecting dust on a shelf? Put them to good use! This counterweight for Hadley uses a stack of US cents, euro cents or other coins as a cheap and readily available mass. For a general-purpose version with…

Order a print of this model

Printables

Weights

This is a model of weights like you can find them in the gym. If you're planning to build a gym and want to present your idea to somebody I would suggest to print those weights out and place them in your gym (people can image the finished…

Order a print of this model

Printables

Valve Index headstrap coin counterweights

I was not satisfied with any of the existing options for counterweights (too obtrusive, inconvenient or unreliable to install), so I made a new system for my VR set. This one sits closer to the headstrap, making it less obtrusive. It uses…

Order a print of this model

Printables

John Deere - Suitcase Weights with Bracket - 1:8 Scale

John Deere - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale John Deere tractors. Uses M4 Screws

Order a print of this model

Printables

John Deere Rear Wheel Weights - 1:8th Scale

John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws

Order a print of this model

Printables

John Deere Front Slab Weights - 1:8th Scale

John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.

Order a print of this model

Printables

International Harvester IH Rear Wheel Weights - 1:8th Scale

International Harvester IH Rear Wheel Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel rims to…

Order a print of this model

Printables

International Harvester IH Rear Wheel Split Weights - 1:8th Scale

International Harvester IH Rear Wheel Split Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel…

Order a print of this model

Printables

Casting Molds for 2.5lb, 5lb, and 10lb Concrete Olympic (2 inch) Weights

In normal circumstances this wouldn't make any sense. Concrete isn't an ideal material to use for making your own weights: even though it's pretty heavy, it's not as dense as the materials that weights are usually made of (iron or steel),…

Order a print of this model

Printables

HSW pattern weights

printed on bottom side with supports (testing a .8 nozzle, supports are… challenging to remove :) ) openscad library for hsw (see original) installed in library folder

Order a print of this model

Printables

Unresponsive bearing yoyo with weights - "C" size bearing

I've redesigned my previous yoyo to be unresponsive and accept the widely used standard "size C" yoyo bearing and standard size C silicone response pads. NOTE: This model has an extra layer covering the hole where the bolt goes. You must…

Order a print of this model

Printables

Dummy 13 / Mini 13 Dumbbell Weights (assorted sizes)

I've created a Dumbbell set for the Dummy 13 / Mini 13 figures using OpenSCAD. The weights and handles are printed separately and pressed fit together to provide: 1) easier installation, 2) multicolor support. If you generated the STL's…

Order a print of this model

Printables

Minion Fidget Spinner with bearing weights

Just removed the hex nut spaces and then added arms for 608 bearings. Print Settings Printer: Maker Select V2 Rafts: No Supports: No Resolution: .2mm Infill: 30 Category: Toys & Games

Order a print of this model

Printables

International Harvester - Suitcase Weights with Bracket - 1:8 Scale

International Harvester - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale International tractors Comes in two different varieties. Set of 10 and Set of 12 suitcase weights with mounting brackets to match. Brackets…

Order a print of this model

Printables

Simple Full Size Coathanger (parametric + 3 weights included)

Includes multiple pre-rendered weights as well as parametric source files for making customizations or remixes. Print sizes start at 308mm.

Order a print of this model

Printables

Fabric weights (pattern weights) for quilting and kitemaking - industrial style

I created a bolt with an M20-compatible thread and a wide and flat head to build fabric weights for my kitemaking projects. The Nut Job script for OpenSCAD makes this a very easy task. I added thin adhesive felt pads underneath to protect…

Order a print of this model

Printables

IKEA SKÅDIS compatible Motor Mount & counterweights for Drawbot / Polargraph

Designed for use with the Makelangelo polargraph project! It should be compatible with Werner's penholder for the gondola. BOM 1 x Motor Mount 2 M4 nut 3 M3 x 8 SHCS 2 M2 x 10 SHCS 2 M2 nut 2 M2 washer 1 NEMA17 stepper motor 1 10T85…

Order a print of this model

Printables

Bookends with Grapes & weights

I used your model and added a cylinder at the botom with a negative volume inside the cylinder to be able to add weight

Order a print of this model

Printables

TRAXX Mounts for Brass Weights

Avoid supports in the screw hole for the shock.

Order a print of this model

Printables

HueForge Marilyn Monroe hitting weights

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 250x263.28mm in size You may print at higher layer heights below the Base Thickness of 2.48mm The Max allowed Thickness is 4.48mm and the Actual…

Order a print of this model

Printables

HueForge Marilyn Monroe hitting weights-Thin.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 250x263.28mm in size You may print at higher layer heights below the Base Thickness of 1.04mm The Max allowed Thickness is 3.04mm and the Actual…

Order a print of this model

Printables

Butterfly XT yoyo Weights

l don't know why but yesterday l was playing with my Butterfly XT and l thought hmmm…. didn't Duncan make mod parts for the butterfly xt and freehand? and so l looked but l was 4-5 years to late lol. i took it apoun myself to make my own…

Order a print of this model

Printables

Bobber (v.2) with space for LED and/or weights

It is compatible with several of my other models, such as a number of my tackle boxes and Hobo reel.

Order a print of this model

Printables

Technogym Bike Group Cycle weights ( dumbbell ) holder

The Technogym Group Cycle has no bike weights holder, so i needed to design one. The holder has two mounting points. Except the Holder you will need a 15 mm diameter 6 wood screw or M6 screw I recommend printing with 4 Perimeters and…

Order a print of this model

Printables

Weights for vertical blinds

Závažie na vertikálne žalúzie. Treba dokúpiť podložky o veľkosti 23,80 mm.

Order a print of this model

Printables

weights

Weight rail and box for model plane

Order a print of this model

Printables

Belt clip with hook - re-remixed for harder weights

PETG will be the best option. You should print it with 6 perimeters, 1 upper and lower layer and Arachne wall generator.

Order a print of this model

Printables

Weighted D20's! Trick your friends! No hardware or weights

I made these dice as the perfect joke and prank! Great for tricking your friends without them even realizing! These dice are subtle but potent , they don't roll strait 20's or 1's but they tend to roll one a lot more often than the other……

Order a print of this model

Printables

Scx30 Wheel Weights

Scx30 Wheel Weights. No modifications required to the stock Scx30. Prints quickly and without supports. If printed with PLA, each wheel weights approximately 1.3 grams. Denser filaments might be better for making them heavier if needed.

Order a print of this model

Printables

Mold+for+casting+fishing+weights

The form has a volume of 35 ml.

Order a print of this model

Printables

magnetic wheel weights for siku control

made a small magnetic wheel weight for the siku control tractos. magnet was 8 x 2 mm (room inside stl is 9 x 3mm) You have to pause the print to insert the magnet

Order a print of this model

Printables

Light Weights Baby!

Order a print of this model

Printables

Gym Weights Holder

Order a print of this model

Printables

Honda handlebar weights/ends Spacer | CBR 1000 RR SP1 SC77 (2017)

Just a spacer to get the original further out to fit with other Grips like Dominos in my case.

Order a print of this model

Printables

Powerblock weights color indicator

The color indicators on the side of the weight wear down with time, I designed this to replace them when they do. Initially printed with PLA for sizing and testing purposes and it worked well but is a little flimsy, petg is a little…

Order a print of this model

Printables

Base for adding weights to Yourigh's Pinecil Stand

I wanted to add weights to Yourigh's pinecil stand as mine sometimes gets knocked over. I used lead curtain weights as I had some, but anything will will do, old nuts and screws, tyre weights, fishing weights, even concreate. Once…

Order a print of this model

Printables

Small + Chunky S-hook for CSM Weights

Order a print of this model

Printables

Sewing weights box (parametric)

Parametric storage box for circular sewing weights, like the common metal weights sold online ( like those ). It helps keep them organized, neatly stored, and easy to access while sewing. Printing Printing is straightforward with standard…

Order a print of this model

Printables

Coaster for Weights

Plate to protect Surface

Order a print of this model

Printables

Storage Box for Calibration Weights (Dexcom G7 Magnets)

Order a print of this model

Printables

Závaží filamentu PROF LAB / PROF LAB filament weights

Závaží filamentu cívky na AA baterie pro použití v AMS. Použití pro cívky značky PROF LAB. AA battery spool filament weights for use in AMS. Use for PROF LAB brand spools.

Order a print of this model

Printables

Star Decorations - For Hanging or as Balloon Weights

A collection of stars in a variety of styles These include a space perfect for a UK penny inside to add enough weight to hold down one or two light helium balloons (your mileage may vary :) ). Add a pause or material change in your slicer…

Order a print of this model

Printables

Small hanging weights

Print without supports, fill with sand or steel balls with a diameter of 4.5 mm and screw the lid ;-).

Order a print of this model

Printables

Foqos brick with weights

A 50 × 50 mm brick designed to house a 25 mm NFC tag and embedded magnets. It can be used as a Foqos unlock key, but supports any NFC-based application. Internal compartments accommodate up to five 5-eurocent coins, adding mass for…

Order a print of this model

Printables

Mechanism Steam Controller Dock with voids for weights

Void sizes are 103mm long, 16mm wide and 4.5mm thick which just was the size I cut from some scrap I had laying around.

Order a print of this model

Printables

Mechanism's Steam Controller Dock with Penny Weights and Hot Glue Feet

This is Mechanism's Steam Controller Dock, but I have modded it to accept 50 pennies at the bottom as weights, 4 small holes to use for hot glue feet, and reduced baseplate thickness to accommodate for the extra weight added by the…

Order a print of this model

Printables

Kinetic Spiral – Dynamic Pendulum Weights

Overview This expansion pack introduces alternative pendulum weight designs for the Kinetic Spiral system. Designed for the original Kinetic Spiral Wind Chime: Different shapes create different airflow behavior, pendulum response and…

Order a print of this model

Printables

3d printed Educational Math Scale with Weights

IMPORTANT: 3D printing of weights requires 100% infill !!! The colors in the images are just an example. It can be printed in any other color ! Maximum dimensions of the weight scale: ~210mmL x 50mml x 130mmH This educational tool helps…

Order a print of this model

Printables

Mechanism Steam Controller Dock with Wheel Weights

Wheel weights seems to be pretty standard in weight (5g or 10g) but I don't know if it's the case too for the dimensions. I used these: https://www.amazon.fr/dp/B08T1TWG5R There are 4 empty slots in the base: 2 long ones measuring…

Order a print of this model

Printables

Replacement body for broken curtains weights

Replacement body for broken curtains weights. For joining two half to each others use CA glue, super glue or cyanoacrylate glue

Order a print of this model

Printables

Tractor Front Weights

Drop-in replacement for the Front Axle Mount. Print 9 weight holders for a full rack. The weight holders are sized to fit ½ oz lead tire weights.

Order a print of this model

Printables

Legs Weights for Seestar

This is a new feature for my Seestar tripod Extender v2 to easily add weights for the tripod while using the telescope in EQ mode. *1x Screw needed Tripod Extender can be found at this link:…

Order a print of this model

Printables

Heavier front Weights

This is a modification of the front weights by @bishopdq_2525640 that includes a hollow space for a coin (uk 10p reccomended, quarters will also fit but are lighter and looser fitting). the attatcher can be found from the original weights…

Order a print of this model

Printables

Strong Weighted Yarn Clip - for Knitting Machine or CSM Weights

The "standard" yarn clips are annoying because they're bulky and not very strong. This is a very simple print for a yarn clip that is much stronger, takes up less space and is very easy to slide onto the end of the yarn. It works with…

Order a print of this model

Printables

1/2 Scale H.O.R Siro-Drone 95S/97S (Weights)

So, this is a 1/2 Scale H.O.R Siro-Drone. I might work on a Sirex soon, but for right now I just have this. You need a Samsung 29 motor for this, any of them work (I think), M4 allen wrench, and M2 (I think) allen wrench. You also need a…

Order a print of this model

Printables

1/2 Scale H.O.R Siro-Drone 93S (Weights)

THIS HAS NOT BEEN TEST PRINTED! PRINT AT YOUR OWN RISK! You need sammysung 29 motoroto (any works) Allen wrench and m4 eyebolt too PARTS NEEDED: Weights (16): https://www.amazon.com/gp/aw/d/B06XDHXRT7/?th=1 M4 Screws:…

Order a print of this model

Printables

Parametric box insert for 500g calibration weights

this is an insert for the standard parametric box which holds the 500g calibration weight set you can get in that flimsy blue box on aliexpress. i also included the F3D file and the parts for the box itself so you dont need to size it by…

Order a print of this model

Printables

Holder for PowerBlock Elite Dumbbells 2.5 lb Handle Bar Weights

PowerBlock Elite adjustable dumbbells have 2.5 lb cylindrical bars that can be removed/added to further adjust the dumbbell weight. If you don't have the PowerBlock stand and instead just have your set on the ground, this print will give…

Order a print of this model

Printables

Fidget Spinner with internal weights

This is based off of Duke T's fidget spinner where the weights are inside the spinner. According to Duke T's instructions, this fits 3 pennies or 1 3/4" x 3/16" button magnet. The pennies fit for me, but the magnets did not. I redid this…

Order a print of this model

Printables

Apple Watch Stand Base - Inset Weights

A remix of BlackBanshee 's Apple Watch Stand - Weighted . See the original thing for the other two parts. Instead of two horizontal cylinders for the pennies, that easily fall out if you're taking the stand apart to remove your charging…

Order a print of this model

Printables

Quest 2 Dumbbell / Weights

I designed this gadget to make to Quest 2 controllers a bit heavier. With the extra weight games like minigolf or fighting with a sword feel more realistic. Also it may increase the fitness aspect. I chose wide washers from amazon, outer…

Order a print of this model

Printables

Wheel weights (carrier) for Traxxas TRX4

Designed a pressfit-carrier to add ~57g weight per wheel for the Tactical-Unit Wheels. I like the Wheels alot because of the scale heavy duty look with central tire Inflation system. But i ordered them pre mounted, so i needed a solution…

Order a print of this model

Printables

Weighted Gridfinity Baseplates larger weights

Original Gridfinity accessories and baseplates by Zack Freedman: https://thangs.com/designer/ZackFreedman NOTE: If you're going to add weights to the model, please make sure the dimensions of your weights fit in the slot. This model has a…

Order a print of this model

Printables

Solid swim bait No weights needed

This modifies the original design so that weights are not needed. Also the loops are on both ends. Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution: Doesn't Matter Infill: 100% Category: Sport & Outdoors

Order a print of this model

Printables

Stackable weighted Gridfinity baseplates (larger weights)

Order a print of this model

Printables

Box (Container) for Calibration Weights

This is a box (container) for this calibration weights set: https://smile.amazon.com/gp/product/B07B8J19DM/ which includes 1g, 2g, 5g, 10g, 20g, 50g, and 100g weights + metal tweezers. It includes a space for the tweezers and should store…

Order a print of this model

Printables

Imperial Credit Chit with Internal Weights

This prop was made for a role-playing game I participate in, to have actual physical objects for the in-game money. As you have seen, it's based on the Credit Chits seen on the Mandalorian, but it's not quite screen-accurate. Firstly, the…

Order a print of this model

Printables

Glasses Stand (Spec Stand) No Text/Better weights Remix

Didn't really like the text so I just removed it. Also changed to a bottom press fit for pennies instead of internal pause and place. Makes it a bit easier and no one is looking at the bottom anyways. I ended up putting a felt pad on the…

Order a print of this model

Printables

Creality Digital Spool Rack Taring spool weights

English: I have several Creality spool scales with the the issue, that they shut off automatically. Hence, when one wants to print again, one is unable to tare and determine how much filament is really left on the spool. To tare the…

Order a print of this model

Printables

finger weights

for when your fingers need a workout.

Order a print of this model

Printables

ZWO AM5, Celestron AVX/CGEM - 1" Weight Plate Adaptor For Counterweights

Remixed from https://www.thingiverse.com/thing:4834804. Fixed the center hole on the spacer at 20.5mm for a tight fit on Celestron AVX & CGEM & ZWO AM5 mounts. Print Settings Printer brand: Prusa Printer: Mini Rafts: No Supports: build…

Order a print of this model

Printables

cement weights mould - Carp Fishing

{ENG} Simple form for making cement weights. It's best to print using PETG. To increase the weight of the sinker, simply scale the form upwards. Preparation of the sinker: Before pouring the form, it should be lubricated to make the…

Order a print of this model

Printables

Quest 2 Counterweights

The Quest 2's habit of sliding down my face whilst sim racing because it's unbalanced was driving me nuts, so I made these. Counterweights for KIWI design Comfort Head Strap for the Quest 2. Designed to snap onto the back on either side…

Order a print of this model

Printables

Balloon weights

I needed two small weights for my child's birthday balloons. Made these up to do the job. Each weights 6g so perfect for little helium balloons to stop them blowing off!

Order a print of this model