Technogym Bike Group Cycle weights ( dumbbell ) holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.80 – €10.75 net (excluding VAT)
For file: tchnosup_A_1_0.2mm_PETG_MK3SMMU2S_10h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.78 excluding VAT (range midpoint).
- Weight reported by the author
- 125 g
- Print time reported by the author
- 10.05 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
1,5 Kg Technogym Bike Weights Holder for Technogym Group Cycle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 698
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Share Alike
The Technogym Group Cycle has no bike weights holder, so i needed to design one.
The holder has two mounting points. Except the Holder you will need a 15 mm diameter 6 wood screw or M6 screw
I recommend printing with 4 Perimeters and supports for the overhangs.
You also find a Gcode for PETG here