Counting matching models…
Easy ruler for reading how much weight is on the Eisenlink Adjustable Dumbbell (https://www.amazon.co.uk/dp/B0BZHHCSFD) The left side of the ruler measures when only the 2kg plates, are used. Read the right hand side when 2 x 1kg plates…
Dumbbell shaped can opener. Four printed pieces, one m3x30mm bolt. Printed with PC, but PETG should be plenty strong. Top piece is attached with superglue.
The matte black, monochrome finish highlights muscular anatomy and gives the sculpture a bold, modern look. Perfect for gym décor, fitness studios, or minimalist interiors.
Bring energy and strength to your modern scenes with this Fitness Man with Dumbbell 3D printable character model. Featuring a muscular athletic build, casual workout attire, hand-held dumbbell, and towel over the shoulder, this figure…
No special printing requirements. I have made these for myself from PETG. Tested succesfully with InSportLine bars.
A two-piece clamshell sleeve designed to increase the grip diameter of standard Olympic adjustable dumbbell handles (25.27mm) to match the feel of fixed dumbbells (~33mm centre, tapering to 28.5mm at the edges). M3 Screws or small cable…
A press-fit end cap for standard 2-inch (50mm) Olympic adjustable dumbbell sleeves. Designed to make loading heavy dumbbells for chest press easier and more comfortable, the wider base gives you a much larger contact surface when resting…
Used to exercise with Dumbbell required, it is made out of recycled empty prusament spool
it is made in inches. It needs to be reduced to the size you choose
Dumbbell keychain to share with your gymbro/symsis I used 2x 6x3mm magnets I found on amazon There are two files if you want it multicolor. Make sure to align everything fine while slicing it and include a pause at height before the…
Print with the American flag faced down. Print with normal supports, not tree supports. The supports will come out easy and clean.
I needed some organization for my dumbbells and some extra weight I had. I sketched up this rack which fits two dumbbells and some extra weights on top. Everything was printed in PLA with 4 perimeters and 25% infill. I am using that one…
This is a remix of the keychain https://www.printables.com/model/615893-dumbbell-keychain by Erika Heidi (@erikaheidi)
**English:** I created this dumbbell-to-kettlebell adapter. It also helps when using the dumbbell for sit-ups and squats. There's an earlier, longer version, but I don’t like it as much. I’ve also made a version for two materials: TPU and…
Small dumbbell earrings. holes are sized for a 16 gauge wire insert Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 200 Infill: 38 **Filament:** PolyMaker PETG Category: 3D Printing
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG. Supports : For Handle Only. Letter/Name Parts : I provided all letters with two font styles, and one blank in case you want to choose your own font or write your full…
Printed in both ABS and PETG without supports at 0.3 layer height. Regarding threads, I suggest printing the v2 since it's more resistant and fast to print. Cut the long thread before slicing at the desired thread height. For example, I…
Print two for each dumbbell. I have used TPU, other strong materials might work too but I chose TPU for its abrasion resistance. The downside is, that it takes quite some time to print one piece.
Added 2 models: The first one is base model - you can to write all what you want there. Second one is with “1 Kg” mark. For the post processing I used Tamiya putty → sand well → primer → chrome color → (not necessary, but vax or lack can…
For every COOKIE and GYM lover! For every COOKIE and PUZZLE lover!
This is a 25-50mm adapter sleeve for converting standard threaded barbells or dumbbells to olympic 50mm size. total length is 190mm, thread depth is 165mm. I also made a separate 115mm spacer to cover the remaining thread on my standard…
These holders support PowerBlocks so they're easy to see and switch weight settings when on a table. Designed specifically for the PowerBlock Sport 24's but might work with other PowerBlocks, YMMV
If you need elbows rehab or you want do train your arms to be a better pistol shooter or else... You can convert a typical dumbbell in to a clubbell.
Allows you to sort your dumbbells by size in minimal space. Required material : printed parts x7, DIN7985 M4x16 screws and DIN985 M4 nuts. Using PLA as a printing material , the strength of the product is enough to support dumbbells up to…
Hole diameter fits the threaded nut, there is enough space to hold the grip. I printed the test part from PETG with quite low infill and it holds 20-22 kgs.
It need to be printed on the high surface area of the nut, at 10 mm/s for the first layer, and the other layers idc, u could use the speed u want. I used a Filament Dryer for my filament so it affected a little the tolerances in the…
Helps with some exercises, for example overhead triceps extension, hex press, close grip row, etc. Those are much easier if you have hexagonal weights, the round ones are much harder to hold close together without them slipping. The one…
Easy ruler for reading how much weight is on the Eisenlink Adjustable Dumbbell (https://www.amazon.co.uk/dp/B0BZHHCSFD) The left side of the ruler measures when only the 2kg plates, are used. Read the right hand side when 2 x 1kg plates…
Two versions. Normal and extended for people using larger diameter weights. Turns your 1 inch dumbbell bars into push up bars. Also keeps your weights from rolling around which is nice. Mix up your workout. Category: Sport & Outdoors
Introducing the Dumbbell Forearm Grip—the unsung hero of your home gym setup. This ingenious attachment seamlessly screws onto one end of a screw-type dumbbell, offering a focused workout for those oft-neglected forearm muscles. No longer…
Made this to keep the weights off the ground on my veranda/patio. Printed these in PLA with only 2 perimeters and minimal fill and they have held up for a year or so, with some minor damage from abuse. I would recommend printing with more…
Due to a drop of the dumbbell, a pin that catches the weight plate broke. By looseing a few screws it can be easily replaced (dont't forget to lubricate it). I used 8 outlines to be sure it prints 100% solid. Use the orientation in the…
Created an incremental dumbbell that starts at 1 pound and can go all the way to at least 33 pounds in as little as 1 ounce increments! The 2 ounce weight is printed entirely with PLA filament. Approximately 1 inch by 1 inch by 3 inch,…
This wedge is used on either side of the REP x Pépin dumbbell shuttle to keep it resting in place. It was designed as part of a DIY dumbbell stand as explained here . Two wedges are used for each shuttle and screwed into the underlying…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Simple nut extension / handle for dumbbell to make a really short barbell from it. Usable if you want to do (limited) barbell training with dumbbell. Personally I can recommend for training with lower weights (like forearm exercises) as…
For 1" / 25cm thread handles. Ring should be a rubbery material like TPU.
You are a 3D printing nerd AND lift weights? This is just for you. If you own the 85lbs Version of the REP x PÉPIN Fast Series adjustable Dumbbell you can integrate the printable 2.5lb micro-plates holder and bolt it with M8 screws…
I've created a Dumbbell set for the Dummy 13 / Mini 13 figures using OpenSCAD. The weights and handles are printed separately and pressed fit together to provide: 1) easier installation, 2) multicolor support. If you generated the STL's…
These are molds for creating a set of dumbbells out of concrete. Weights ranging from 7 to 48 lbs are possible. The larger weights will require a large format printer to print. The process to create a dumbbell is: Print the four parts:…
Designed this to crush cans. The inside is 94mm across from flat side, to flat side, there seems to be a lot of variation in the size of the weights, so make sure yours fits before printing it. The idea is that you just stick a 15lb…
Lets start by acknowledging that you could buy a stand cheaper than what I have printed, but where is the challenge in that! check your filament stocks before printing. This Dumbbell stand is an upgrade from my first go ( Dumbbell Weight…
Keychain with two dumbbells and "Gym" lettering. Dimensions: 50x30mm. The hole is 5mm in diameter. The lettering is recessed by 1.5mm. Can of course be scaled accordingly. Printed with PLA.
The rack for our dumbbells has a v-shaped top and I wanted a small box that would fit on top of it to store small items. Because of the v-shape on top, I could not just put a box up there, hence this project. Since the dumbbell rack is…
This is the perfect gadget for your dumbbell set ! A simple, yet class holder with strong supports for your dumbbells ! Three versions come with the model : DBHolder1 is the one on the first photo, includes text, a biceps decoration,…
Width of the stand is 12 cm. Diameter for the bar is 1.3 cm. I've printed mine with Polyterra PLA, which isn't very strong. Still holds my 12.5 kg dumbbell easily. I would recommend some rubber feet.
You'll need to print two of these and connect them together with M5x8 threaded inserts and bolts. It's admittedly a little tricky to get the bolts threaded in. I used a needle nose pliers to get them tightened up.
Fits into the feet of the rack with a slight press fit. Be careful with inserting as it's easy to pinch your fingers - recommended to use a hammer and lightly tap it instead. Printed mine in PLA and it seemed to work perfectly - doesn't…
I printed in PLA with four walls & five layers, top, & four layers bottom. Print with plenty of standard supports.
this is not a real dumbbell. some assembly required. use glue. this iphone holder was modeled for a iphone 12.
The Technogym Group Cycle has no bike weights holder, so i needed to design one. The holder has two mounting points. Except the Holder you will need a 15 mm diameter 6 wood screw or M6 screw I recommend printing with 4 Perimeters and…
A leg saver 3D printed endcap for good old castiron dumbbell/plate systems you might have at home which uses existing metal nuts for safety and magnets to attach the leg saver to the outermost plates tightly. If you printed it/created it…
Dumbbell shaped can opener. Four printed pieces, one m3x30mm bolt. Printed with PC, but PETG should be plenty strong. Top piece is attached with superglue.
Plate collar clip for use with loadable dumbbell handles. Designed to be used with Bellofsteel loadable dumbell handle, should work with any bar with 50mm diameter. Recommend to use with PLA+, or even Nylon. CAUTION NOT design to be used…
Dumbbell nut fi 27,5 / fi28 PETG or something stronger, for myself I printed 0.1 / 100%, organic support. Removing PETG supports will not be pleasant.
Lock your gains with precision and style! This 3D-printable Dumbbell Collars / Barbell Clamps Kit is designed to keep your weights secure and your workouts smooth. 3 different sizes: IN_DIA 31 mm × L 50 mm – ideal for standard dumbbell…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A wall mounted bracket for storing dumbbells and barbells. Speciffically shaped for Decathlon 28mm bars. For dumbbells you only need the ‘upper’ bracket, for barbells you might want to also print the ‘lower’ bracket to prevent it swinging…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a replacement handle for the Bodymax Dumbbell Bar. The original one was rubber that fell apart. The centre diameter of the hole is 24mm Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2…
This is a simple dumbbell rods connector designed to fit over standard M25 x 6 bars. It connects two rods to make barbells. I reccomend printing using a durable material such as PETG or ASA with min. 30% infill and 3-4 walls.
I have tried several variants of nuts which looked promising, but none of them rotated freely and lacked the shape. So I recreated the original nut. Note: the diameter of shaft is 25mm with pitch 6.4mm Layer: 0.2mm Walls: 3 Supports: yes…
Nice and simple hexagonal rims / sleeves / protectors / covers to put on round dumbbell weights (adjustable dumbbells). Stops from rolling around and looks nice. I haven't seen adjustable weights in hexagonal shapes, and would not care…
I made this to use my existing 50mm Eleiko 0.25 kg & 0.5 kg plates with my Ironmaster dumbbells. Printing: PLA, standard settings Dimensions: OD: 49.75 mm ID: 26.8 mm Thickness: 6 mm Use this adapter at your own risk. Improper use can…
This compact holder is tailored for home gyms or training corners where space and security matter. It provides a safe and stylish way to store your dumbbells, preventing rolling, scratching, or unnecessary wear. It has been designed for…
Fillable Adjustable Dumbbell (DIY / 3D Printable) This is a fillable, adjustable dumbbell designed for home use and easy 3D printing. Instead of fixed weights, the dumbbell can be filled with common materials like sand, rice, lentils, or…
Einfache Auflage bzw. Halterung für Kurzhanteln. Ausgelegt für Kurzhanteln der Gesamtlänge 360mm. Innenabstand der Gewichtsscheiben zwischen 135mm u. 140mm. Durchmesser der Scheibe ~160mm.
A simple and sturdy stand designed to hold dumbbells securely and keep your workout area organized. Suitable for round dumbbells and adjustable weights, depending on size.
York makes a dumbbell rack that has plastic supports for the handles. Over time they split. While they sell replacements, they are as thin as the original. So why not print beefy replacements. :-) These will fit the York dumbbell rack you…
I created this simple dumbbell that may be 3D printed because I had unused weights and wanted to put them to use, without buying another set of dumbbells. This also has the advantage of being lightweight, when compared to the metallic…
The matte black, monochrome finish highlights muscular anatomy and gives the sculpture a bold, modern look. Perfect for gym décor, fitness studios, or minimalist interiors.
Bring energy and strength to your modern scenes with this Fitness Man with Dumbbell 3D printable character model. Featuring a muscular athletic build, casual workout attire, hand-held dumbbell, and towel over the shoulder, this figure…
A simple stand for PROIRON dumbbells seen below, designed for them to slot in perfectly. It was made with a set of bases to slide across carpets with easy, allowing one to 'shove' their set of dumbbells under the bed or cupboard. Please…
No special printing requirements. I have made these for myself from PETG. Tested succesfully with InSportLine bars.
This stand is designed specifically for Decathlon 1 kg and 2 kg dumbbells. It holds two dumbbells of each size and keeps them organized instead of lying loose on the floor or a shelf. It also adds a practical handle at the top that allows…
The adapter was designed for plates with the following dimensions: Inner diameter: 31 mm Plate thickness: 34 mm Mount counterweight shaft diameter: 12 mm The main version is designed for one plate (tested with a 1.25 kg plate ). An…
A two-piece clamshell sleeve designed to increase the grip diameter of standard Olympic adjustable dumbbell handles (25.27mm) to match the feel of fixed dumbbells (~33mm centre, tapering to 28.5mm at the edges). M3 Screws or small cable…
A press-fit end cap for standard 2-inch (50mm) Olympic adjustable dumbbell sleeves. Designed to make loading heavy dumbbells for chest press easier and more comfortable, the wider base gives you a much larger contact surface when resting…
Used to exercise with Dumbbell required, it is made out of recycled empty prusament spool
it is made in inches. It needs to be reduced to the size you choose
A dumbbell holder that isn’t limited by the number of weight plates it can support.
About Dumbbell holder to hold your dumbbells! There are two versions, a 12cm and a 10cm version; choose one or the other. This is in reference to the length of the bar/handle. Print Feedback I recommend printing with multiple wall loops…
Solution This snap-on pad increases the surface area of the dumbbell end. It spreads the load evenly across your thigh, eliminating painful pressure points. Lift heavy without flinching. Features · Pain-free lifts: No more metal digging…
