Fabric weights (pattern weights) for quilting and kitemaking - industrial style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I built a set of fabric weights made from large M20 cap nuts and a special 3D-printed bolt as a footplate
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 17
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a bolt with an M20-compatible thread and a wide and flat head to build fabric weights for my kitemaking projects. The Nut Job script for OpenSCAD makes this a very easy task. I added thin adhesive felt pads underneath to protect more delicate fabrics.
The domed cap nuts used are commercially available DIN 1587 (high shape) M20 in stainless steel.
Each assembled piece weighs in at 110g (~4 oz), has a diameter of 38mm (1.5 in) and is also 38mm (1.5 in) high. I used XT-CF20 filament and 20% infill.
----
Ich habe einige M20-kompatible Gewindeschrauben mit einem sehr breiten und flachen Kopf gedruckt (mit dem Nut Job-Script ist das nicht schwierig). Zusammen mit käuflichen Hutmuttern (DIN 1587, hohe Form) aus V2A-Stahl entstehen so Stoffgewichte mit einem sinnvollen Gewicht von jeweils ca. 110g. Ich habe noch selbstklebenden Filz verwendet um empfindliche Stoffe zu schonen.
Durchmesser und Höhe sind je bei 38mm - gedruckt mit XT-CF20 Filament und 20% Infill.