1 / 4
Funnel extension rain gauge / tipping bucket (weather station) — zdjęcie 1
1 / 4

Funnel extension rain gauge / tipping bucket (weather station)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Funnel extension for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG). The…

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
657
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Funnel extension for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG).

The model has a groove that fits exactly into the edge of the rain gauge. I have filled this joint with silicone, so that the two parts are firmly connected and watertight. I used white PLA as the material and it still endures well now after almost two years (-10°C to +40°C). To prevent moisture from penetrating in winter and cracking the material in frosty conditions, I also smoothed the inside with silicone.

The extension increases the accuracy to exactly 0.1 l/m². I have compared the annual amount in the meantime with the official weather station in my area and have come to almost exactly the same result.

The extender has a footprint of 150x190 mm >> A = 0,0285 m2 >> 1 tip = 0,100 l/m2

You can also find the part to attach the entire unit to a pole here on thingiverse:
https://www.thingiverse.com/thing:3793472

Feel free to remix my Tinkercad-model:
https://www.tinkercad.com/things/9uwNDriIFqR

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Yes

Supports:

Yes

Resolution:

200

Infill:

20


Filament:

Eryone PLA White

Category: Outdoor & Garden

Tagi